Pitco Frialator 35C+, 45C+ specification

Code (NFPA 54-Latest Edition) and ANSI Z223.1-Latest Edition Latest Edition. In Canada, install the fryer in accordance with CAN/CGA-B149.1 or .2 and local codes. Gas line sizing requirements can be determined by your local gas company by referring to National Fuel Gas Code, Appendix C, Table C-4 (natural gas) and Table C-16 (propane). The gas line needs to be large enough to supply the necessary amount of fuel to all appliances without losing pressure to any appliance. Other factors that are used to determine the piping requirements are BTU requirements of the appliances being connected and the length of pipe between the meter (main shut off) and the appliances.

WARNING

NEVER supply the fryer with a gas that is not indicated on the data plate. Using the incorrect gas type will cause improper operation. If you need to convert the fryer to another type of fuel, contact your dealer.

1.4.2.1Fuel Types - Each fryer is equipped to work with one type of fuel. The type of fuel with which the appliance is intended to operate is stamped on the data plate attached to the inside of the door.

WARNING

DO NOT use an open flame to check for gas leaks!

1.4.2.2Gas Line Connection - Connect the fryer to the gas supply line with a connector that complies with the Standard for Connectors for Movable Gas Appliances (ANSI Z21.69-Latest Edition). If you are installing a fryer with casters use a quick disconnect refer to the Quick Disconnect installation instruction, 1.4.2.3. Connect the gas line to the fryer using a pipe joint sealant that is resistant to liquefied petroleum. If the fryer was disconnected during the fuel line testing, use a solution of soap and water to leak test the new connection.

NOTICE

NEVER use an adaptor to make a smaller gas supply line fit the cooker connection. This may not allow proper gas flow for optimum burner operation, resulting in poor cooker performance.

1.4.2.3Quick Disconnect Gas Connection - Gas fryers equipped with casters must be installed with connectors that comply with the Standard for Connectors for Movable Gas Appliances, ANSI Z21.69-Latest Edition, and Addenda Z21.69A-Latest Edition. This connection should include a quick disconnect device that complies with the Standard for Quick Disconnect Devices for Use With Gas Fuel , ANSI Z21.41-Latest Edition. When installing a quick disconnect you must also install a means for limiting the movement of the fryer. This device will prevent the gas line or the quick disconnect from being strained. The restraining device should be attached to the cooker on the back panel as shown in the illustration. The quick disconnect, hose, and restraining device can be obtained from your dealer.

1-4

45C+, 35C+ specifications

The Pitco Frialator 35C+ and 45C+ are two outstanding fryers designed for high-volume frying operations, making them essential units for restaurants, catering businesses, and any establishment requiring efficient frying capabilities. These models are known for their robust construction, advanced technology, and user-friendly features that optimize performance while delivering exceptional fried food quality.

One of the main features of the Pitco Frialator 35C+ and 45C+ is their impressive oil capacity. The 35C+ has a 35-pound oil capacity, while the 45C+ boasts a 45-pound capacity, allowing for large batches of food to be fried at once. This capacity helps reduce the number of oil changes, increasing operational efficiency and minimizing labor costs. The fryers also incorporate a high-efficiency heating system, which ensures quick recovery times and consistent cooking temperatures, resulting in perfectly fried items every time.

Both models utilize advanced electronic controls, which provide precise temperature regulation and programmable cooking timers. This technology helps prevent undercooking or overcooking, thus maintaining food quality and reducing waste. The user-friendly interface makes it easy for operators to navigate settings, ensuring that even those with limited experience can efficiently use the fryer.

Safety is a crucial aspect of the design of the Pitco Frialator fryers. They come with built-in safety features, including a high-limit temperature switch that automatically shuts off the fryer if the oil temperature exceeds set limits. Additionally, they are constructed with durable materials, enabling them to withstand the rigors of daily use while maintaining excellent reliability.

Both the 35C+ and 45C+ models feature a simple yet effective oil filtration system that enhances oil life and improves flavor quality. By filtering oil during idle periods, these fryers help to eliminate food particles and prolong oil usability, which can lead to significant cost savings over time.

In terms of versatility, these fryers can accommodate a wide variety of frying applications, from crispy chicken to French fries, onion rings, and more. Their design also allows for easy cleaning and maintenance, with components that are conveniently accessible.

In summary, the Pitco Frialator 35C+ and 45C+ are premium options for commercial frying needs. With their large oil capacities, advanced control systems, safety features, and efficiency-enhancing technologies, these fryers stand out in the market as reliable workhorses for any busy kitchen.