ResMed 2011-09, 248551/1 manual Stellar basics, About the control panel

Page 15

Stellar basics

About the control panel

Mains Power LED

LCD Screen

On when operating on mains power.

External power supply

LED

On when external battery is connected.

Internal battery LED

On when internal battery is in use. Flashes when device is turned off and battery is charging.

Alarm LED

Monitoring menu

Setup menu

Info menu

Red or yellow during an alarm or during alarm testing.

Alarm mute button LED

On when is pressed.

Start/stop button

Key

Start/Stop

Push dial (rotate/

click)

Therapy LED

On during treatment. Flashes during mask- fitting operation.

Function

•Starts or stops treatment.

•Extended hold for at least three seconds starts the maskfitting feature.

Alarm mute			• During therapy: Press once to mute an alarm. Press a
			second time to un-mute an alarm. If the problem is still
			present, the alarm will sound again after two minutes.
			See “Working with alarms” on page 13.

•In stand-by mode: Extended hold for at least three seconds starts the alarm LED and alarm buzzer test.

Menu keys	Press the appropriate menu button (Monitoring, Setup, Info)
	to enter and scroll through the relevant menu.
Push dial	Turning the dial allows you to scroll through the menu and
	change settings. Pushing the dial allows you to enter into a
	menu or confirm your choice.

10

Image 15

Contents User Guide StellarRespiratory Care Solutions Making quality of care easy Stellar 100 Stellar Contents Cleaning and maintenance Adverse effects IntroductionIndications for use ContraindicationsStellar at a glance ResMed USB stick Internal batteryPatient interface HumidificationMobile use Setting up for noninvasive useAttaching the H4i heated humidifier for noninvasive use Setting up for invasive useHmef Working with other optional accessories Attaching the pulse oximeterAdding supplemental oxygen Starting therapy using oxygen Stopping therapy using oxygenUsing the FiO2 monitoring sensor Attaching an antibacterial filter Connecting a sensorAbout the control panel Stellar basicsStarting therapy LCD screenPerforming a functional test Check pulse oximeter if in use Starting therapyStopping therapy Check the FiO2 monitoring sensor if in useWorking with alarms Turning off the powerUsing mask-fit Tailoring treatment setup optionsUsing the menus Enu Options Enu Alarm Settings Alarm VolumeSetup menu Configuration Menu Parameter DescriptionOptions On, Auto Device Information Info menuEvent Summary Used HoursCleaning and maintenance Data managementDaily Disinfection WeeklyMonthly Replacing the air filterServicing TroubleshootingAlarm troubleshooting Multipatient useLCD Over Pressure Problem / possible cause Action LCD Internal Battery EmptyLCD High Temperature 10, 11, 12 LCD System FailureLCD Low Respiratory Rate!, High Respiratory Rate Problem / possible cause Action LCD Circuit disconnectedLCD Internal Battery Low LCD Low Minute VentilationOther troubleshooting Treatment pressure seems high Problem / possible cause SolutionDevice does not start when you breathe into the mask Device does not stop when you remove your maskTechnical specifications Power supply Alarm Volume RangeDimensions L x W x H Weight Air outletIEC ClassificationsAir travel requirements Vrms General warnings and cautions SymbolsGeneral warnings and cautions Product Warranty period Limited warrantyApac