ResMed 2011-09, 248551/1 manual General warnings and cautions, Symbols

Page 35

10

100

3.69

1.11

2.21

11.70

3.50

7.0

 

 

 

For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can be determined using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.

NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.

Symbols

Follow instructions for use; Class II equipment; Type BF equipment;

IP31 Device is protected against solid foreign objects of 2.5 mm diameter and greater and

vertically falling water drops; Caution; Standby or preparatory state for a part of

equipment; Connection for oxygen supply; max 30 l/min (max 30 L/min); Data

port; CE labeling in accordance with EC directive 93/42/EEC, class II b;

+ 60 °C + 140 °F

- 20 °C - 4 °F

Temperature limitation for storage and transport; Handle with care; Maximum

humidity; Keep dry; Manufacturer; Upside; Catalogue number;

Serial number; Batch code; Do not re-use; Use by date; Keep

away from sunlight; Do not use if package is damaged; LATEX Latex-free

Environmental information This device must be disposed of in accordance with the laws and regulations of the country in which disposal occurs.

The crossed-out wheeled bin symbol indicates that the product bearing this symbol may not be disposed of together with general household waste, but instead requires separate disposal. This requirement for separate disposal is based on the European Directive 2002/96/EC for electrical and electronic equipment, and the European Directive 2006/66/EC for batteries. You can hand in the product at a municipal collection point, for example. This reduces the impact on natural resources and prevents contamination of the environment through the release of hazardous substances.

Batteries containing more than 0.0005 percent of mercury by mass, more than 0.002 percent of cadmium by mass or more than 0.004 percent of lead by mass are marked below the crossed-bin symbol with the chemical symbols (Hg, Cd, Pb) of the metals for which the limit is exceeded.

For further information regarding product disposal, please contact your local ResMed office or your specialist distributor, or visit our website at www.resmed.com.

Dispose of used air filters and air tubings according to the directives in your country.

General warnings and cautions

WARNINGS

A warning alerts you to possible injury.

Read the entire manual before using the device.

This device should only be used with air tubing and accessories recommended by ResMed or the prescribing clinician. Use of incorrect air tubing and accessories may affect the functioning of this device.

The device and the accessories are to be used for the specified intended use only.

30

Image 35
Contents User Guide StellarRespiratory Care Solutions Making quality of care easy Stellar 100 Stellar Contents Cleaning and maintenance Adverse effects IntroductionIndications for use ContraindicationsStellar at a glance ResMed USB stick Internal batteryPatient interface HumidificationMobile use Setting up for noninvasive useAttaching the H4i heated humidifier for noninvasive use Setting up for invasive useHmef Adding supplemental oxygen Working with other optional accessoriesAttaching the pulse oximeter Using the FiO2 monitoring sensor Starting therapy using oxygenStopping therapy using oxygen Attaching an antibacterial filter Connecting a sensorAbout the control panel Stellar basicsPerforming a functional test Starting therapyLCD screen Check pulse oximeter if in use Starting therapyStopping therapy Check the FiO2 monitoring sensor if in useWorking with alarms Turning off the powerUsing mask-fit Tailoring treatment setup optionsUsing the menus Enu Options Enu Alarm Settings Alarm VolumeOptions On, Auto Setup menu Configuration MenuParameter Description Device Information Info menuEvent Summary Used HoursDaily Cleaning and maintenanceData management Disinfection WeeklyMonthly Replacing the air filterServicing TroubleshootingAlarm troubleshooting Multipatient useLCD Over Pressure Problem / possible cause Action LCD Internal Battery EmptyLCD High Temperature 10, 11, 12 LCD System FailureLCD Low Respiratory Rate!, High Respiratory Rate Problem / possible cause Action LCD Circuit disconnectedLCD Internal Battery Low LCD Low Minute VentilationOther troubleshooting Treatment pressure seems high Problem / possible cause SolutionDevice does not start when you breathe into the mask Device does not stop when you remove your maskTechnical specifications Power supply Alarm Volume RangeDimensions L x W x H Weight Air outletAir travel requirements IECClassifications Vrms General warnings and cautions SymbolsGeneral warnings and cautions Product Warranty period Limited warrantyApac