ResMed Stellar 100 manual Info menu, Event Summary, Used Hours, Device Information, Reminders

Page 22

Info menu

Event Summary

Event summary displays the summary of three types of events: changes in settings, alarms and system events (eg, connection of ResMed USB stick). There are up to 200 events of each type, displayed in chronological order, with the most recent event displayed at the top by default.

Used Hours

Used Hours during the last seven days of treatment are displayed in a bar graph and can be compared to the data of the last 365 days.

Device Information

This screen shows the serial number (displayed as Device SN), software version and other component versions. Data on this screen may be requested for servicing or as part of problem- solving by a technician.

Reminders

The Clinician uses the Reminders menu to alert you to specific events; for example, when to replace the mask, when to replace the filter and so on. The reminder appears in yellow as the date approaches (within 10% of the reminder period). The reminder also displays when the device is powered on. You can clear a reminder message by selecting ‘Reset’, which clears the current reminder date to OFF, or displays the next pre- set Reminder date.

18

Image 22

Contents Stellar User GuideRespiratory Care Solutions Making quality of care easy Contents Data management Cleaning and maintenance Contraindications IntroductionIndications for use Adverse effectsStellar at a glance Humidification Internal batteryPatient interface ResMed USB stickRemote Alarm Setting up for noninvasive useMobile use Setting up for invasive use Attaching the H4i heated humidifier for noninvasive useHmef Attaching the pulse oximeter Working with other optional accessoriesAdding supplemental oxygen Stopping therapy using oxygen Starting therapy using oxygenUsing the FiO2 monitoring sensor Connecting a sensor Attaching an antibacterial filterStellar basics About the control panelLCD screen Starting therapyPerforming a functional test Starting therapy Stopping therapyTurning off the power Working with alarmsTailoring treatment setup options Using mask-fit Using the menus Setup menu Alarm Settings Alarm Volume Setup menuSetup menu Clinical Settings Mask Type Setup menu OptionsParameter Description Setup menu Configuration MenuOptions On, Auto Used Hours Info menuEvent Summary Device InformationData management Cleaning and maintenanceDaily Monthly WeeklyReplacing the air filter Disinfection Multipatient useAlarm troubleshooting TroubleshootingServicing LCD High Pressure Problem / possible cause Action LCD Blocked TubeLCD High Temperature 10, 11, 12 LCD Low PressureLCD Internal Battery Use Problem / possible cause Action LCD Non-Vented MaskLCD Internal Battery Low LCD ApnoeaOther troubleshooting Learn Circuit failed Problem / possible cause SolutionDevice does not stop when you remove your mask USB stick is not readable or writeableTechnical specifications Supply isolated Internal Battery Power supplyExternal DC Power Housing constructionEnglish Vrms Symbols General warnings and cautions Mask should never be blockedGeneral warnings and cautions Limited warranty Product Warranty periodRespiratory Care Solutions Making quality of care easy EUR1