Garland Broiler operation manual Introduction, Installation

Page 5

INTRODUCTION

General Information

1.Check crate for possible damage sustained during transit. Carefully remove unit from crate and again check for damage. Any damage to the appliance must be reported to the carrier immediately.

2.The wires for retaining the burners and other packing material must be removed from units. Any protective material covering stainless steel parts must also be removed.

3.All equipment is shipped from the factory with legs fitted, unless otherwise specified. Where the range is to be mounted on a dais or cove base, it is shipped without legs. Legs must be fitted to the oven where it is installed on a combustible floor.

4.The type of gas and supply pressure that the equipment was set-up for at the factory is noted on the data plate and on the packaging. This type of gas supply must be used.

5.Do not remove permanently affixed labels, warnings or data plates from the appliance, for this may invalidate the manufacturer’s warranty.

Statutory Regulations

The installation of this appliance must be carried out by a competent person and in accordance with the relevant regulations, codes of practice and the related publications of the country and destination.

The installation must conform to the National Fuel Gas Code ANSI Z223.1-1998 or latest edition, NFPA No. 54 – latest edition and National Electrical Code ANSI/NFPA 70-1990 or latest edition and/or local code to assure safe and efficient operation. In Canada, the installation must comply with CSA B149.1 and local codes where applicable.

In Canada, electrical connections must comply with applicable sections of the Canadian Electrical Code, C22.1

-1990, latest edition, “Safety Standard for Installation, Part 1” and C22.2- No. O-M 1982 latest edition, “General Requirements, Part 2”.

INSTALLATION

This appliance is not recommended for residential installation.

Siting

The floor on which the appliance is to be sited must be capable of adequately supporting the weight of the appliance and any ancillary equipment.

Units with ovens must be fitted with legs if installed on a combustible floor.

Clearances

Adequate clearance must be provided for servicing and proper operation.

Location

Combustible

Noncombustible

Construction

Construction

 

 

 

 

Rear

6” (152mm)

0”

Left Side

6” (152mm)

0”

 

 

 

Right Side

6” (152mm)

0”

 

 

 

Installation Notes

Before assembly and connection check gas supply.

A.The type of gas for which the unit is equipped is stamped on the data plate located behind the lower front panel. Connect a unit stamped “NAT” only to natural gas; connect one stamped “PRO” only to propane gas.

Part # 4517385 (02/20/08)

Page 5

Image 5
Contents This or ANY Other Appliance Before Installing or Servicing this Equipment4517385 02/20/08 Garland Commercial Industries, Inc4517385 02/20/08 Important InformationKeep appliance area free and clear of combustibles Table of Contents Individual Burner Input Ratings Technical SpecificationsManifold Pressure SupplyIntroduction InstallationAppliances Equipped With Casters InstallationAppliances Equipped With Legs Ventilation AirOperation Product Application Information OperationShut-Down BroilerProduct Application Information Care & CleaningStainless Steel Broiler SectionInstructions For Removal Grid Rack & Grid Rack Frame Care & Cleaning4517385 02/20/08 Page Page Suite Nettoyage ET Entretien Rôtissoire Section Nettoyage ET EntretienInoxydable Acier Grille De Crémaillère DeMinutes EN Côté Chaque DE Suggérés Cuisson DE Temps Produit DU Applications LES SUR InformationRôtissoire Arrêt FonctionnementInfrarouge À Brûleurs Utilisation Infrarouge À Brûleurs Initiale UtilisationÉlectrique Connexion Suite InstallationLes pour rangées soigneusement être doivent xationfi de Être doivent tuyaux de connexions et raccords les TousVentilation De Air Gaz Du ConnexionPieds De Équipées Appareils Roulettes De Équipés Appareils’installation Sur Remarques EmplacementLégale Réglementation DégagementTechniques Spécifications Matières DES Table Importantes Informations 02/20/08 4517385 nº Pièce Cuisine Série Infrarouge EN RôtissoireInc Industries, Commercial Garland

Broiler specifications

Garland Broiler is a leading name in the commercial cooking equipment industry, renowned for producing high-quality broilers that deliver consistent performance and superior results. Ideal for restaurants, cafeterias, and various food service establishments, Garland Broiler's products are designed to meet the diverse needs of chefs and kitchen operators.

One of the standout features of Garland Broiler is its efficient cooking technology. Utilizing advanced infrared heating elements, these broilers provide rapid, even cooking that ensures food is prepared to perfection while minimizing energy consumption. This technology not only reduces cooking times but also enhances flavor retention, allowing chefs to serve delectable, juicy meats, vegetables, and other items straight from the grill.

The design of Garland Broiler units emphasizes durability and reliability. Constructed from heavy-duty stainless steel, these broilers are built to withstand the rigors of a busy kitchen environment. The robust construction ensures longevity and makes for easy cleaning, which is essential in maintaining food safety standards. Many Garland Broilers are also equipped with a grease management system that helps to minimize flare-ups and maintain efficiency during cooking.

Moreover, Garland Broiler products often feature customizable options that cater to specific cooking requirements. With adjustable grates and temperature controls, chefs can achieve the desired level of char and doneness, whether cooking steaks, chicken, or seafood. The versatility offered by Garland Broilers makes them suitable for various cuisines and cooking styles, enhancing their appeal in a competitive market.

Incorporating user-friendly controls, these broilers allow for precise cooking adjustments. Digital displays and intuitive interfaces make it easy for chefs to monitor temperatures and cooking times without interrupting the workflow. This focus on usability not only improves kitchen efficiency but also helps in training new staff quickly.

Finally, Garland Broiler is committed to sustainability, designing equipment that reduces energy consumption and incorporates environmentally friendly materials. This dedication to eco-friendly practices aligns with the many restaurants and food service businesses that aim to minimize their carbon footprint while continuing to deliver exceptional culinary experiences.

In conclusion, Garland Broiler stands out as a top choice for commercial kitchens, embodying reliability, efficiency, and innovation. With their advanced cooking technology, robust construction, and user-centric design, Garland Broilers meet the needs of today's culinary professionals, helping them raise their cooking standards and enhance their menu offerings.