Zanussi ZSF 6171 manual Activating rinse aid inflow when 3in1 function is selected

Page 14

Activating rinse aid inflow when 3in1 function is selected

3If the 3in1 function is not selected, the rinse aid inflow is always activated.

If the 3in1 function is selected due to the use of 3in1 detergent, the rinse aid inflow is deactivated. If the dishes then do not dry sufficiently, you should re-ac- tivate the rinse aid inflow (see also section “Using 3in1 detergents”).

1.Press the ON/OFF button.

3If the LED indicator of only one programme button is illuminated, this wash programme has been activated. The wash programme must be deselected:

Press function buttons 1 and 2 simultaneously for approx. 2 seconds.

The LED indicators of all the programme but- tons that can be selected will illuminate.

2.Press function buttons 1 and 2 simultaneously and hold them down.

The LED indicators for function buttons 1 to 3 will flash.

3.Press function button 2.

The LED indicator for function button 2 will flash. The multi-display will indicate the current setting:

	0d	Rinse aid inflow deactivated when
	0d	3in1 on (factory setting)
		3in1 on (factory setting)

	1d	Rinse aid inflow activated when 3in1
	1d	on
		on

4.Pressing function button 2 activates and deacti- vates the rinse aid dispensing function.

5.Once the multi-display is indicating the required setting, press the ON/OFF button. The setting is now saved.

14

Image 14

Contents ZSF Following symbols are used in the text Dear CustomerContents Child Safety SafetyPrior to using for the first time General SafetyDishwasher door safety catch Diagram of Appliance Control Panel Function buttonWater SaltRinse Aid DoorSetting manually Prior to Using for the First TimeSetting the Water Softener Range Manual Electronic Multi-display Setting electronicallyWater hardness Adjusting the hardness setting Indication on Only when using the dishwasher for the first time Adding dishwasher SaltFilling Up with Rinse Aid Setting the Amount of Rinse Aid Required Activating rinse aid inflow when 3in1 function is selected Daily use Loading cutlery and dishesLoading cutlery Pots, Pans, Large PlatesCups, Glasses, Coffee Service Maximum height of dishes Adjusting the Height of the Upper BasketRaising / Lowering the upper basket Upper basket Lower basketAdding Detergent Concentrated detergents Detergent tabletsIf you do not want to use 3in1 products any more Using 3in1 detergentsIf you want to use 3in1 products If you want to use 4in1 productsSelecting the dishwashing cycle Cycle Table Selecting a programme Starting a Dishwashing Cy- cle Interrupting or Cancelling a dish- washing cycleCancelling the wash programme Care Plus additional function Setting the Delay TimerSwitching Off the dish- washer Removing the DishesCare and cleaning Cleaning the filtersCleaning the spray arm jets Upper basket spray armBottom spray arm What to do ifRemedying small malfunc- tions Malfunction Possible cause RemedyMalfunction Possible cause Remedy Dishes do not dry and are not shin- ing If the dishwashing results are not satisfactoryDishes are still dirty There are dried water drops on the glass- es and dishesOld appliance DisposalPackaging material Technical data Dishwasher Free-standing appliancesSample loading arrangements Lower basket with cutlery basket Cutlery basketSafety Information for the Installation Installing the Dishwasher Free-standing appliances Connecting the inlet hose Connecting the dishwasherConnecting to the water supply Permitted water pressureSink outlet connection Anti-flood systemExtension hoses Water drainage if the dishwasher is built- in at high levelElectrical Connection Changing a fuseConnecting systems This guarantee does not cover Standard guarantee conditionsEuropean guarantee ExclusionsPage 0870 5 929 Customer Care Department822 612 Subject to change without notice