Starting a Dishwashing Cy- cle
1.Check that the spray arms can turn freely.
2.Turn the water tap on fully.
3.Close the door.
4.Press the ON/OFF button.
5.Select the desired cycle.
The cycle indicator and the respective cycle stages in the cycle progress display will be illuminated. The remaining time expected for the cycle will be shown in the
The selected cycle will begin after approximately 3 seconds.
The current stage of the cycle is always shown in the cycle progress display.
3During the dishwashing cycle, the remaining time shown in the
Interrupting or Cancelling a dish- washing cycle
Interrupt a dishwashing cycle that is in progress if it is absolutely necessary.
Interrupting the dishwashing pro- gramme by opening the dishwasher door
1 Hot steam may escape when the door is opened. There is a risk of scalding.
1.Open the door carefully. The dishwashing cycle will stop.
2.Close the door. The cycle will continue.
Cancelling the wash programme
1.Press function buttons 1 and 2 and hold them down.
The LED indicators of all the programme buttons that can be selected will illuminate.
2.Release the function buttons. The wash pro- gramme has been cancelled.
3.If you want to start a new wash programme, check whether there is any detergent in the dispenser.
4.Switch off using the ON/OFF button.
3Turning off the dishwasher will only interrupt a selected dishwashing cycle, not cancel it. The cycle will recommence after turning the dish- washer back on again.
24