Zanussi ZSF 6171 Sample loading arrangements, Lower basket with cutlery basket Cutlery basket

Page 33

Notes for Test Institutes

Testing in accordance with EN 60704 must be car- ried out with the appliance fully loaded and using the test cycle (see “Cycle Table”).

Tests in accordance with EN 50242 must be car- ried out when the salt dispenser in the water softener and the rinse aid dispenser have been filled with salt and rinse aid respectively, and using the test cycle (see “Cycle Table”).

 

Full load:

Half load:

 

12 place settings

6 place settings including serving dish-

 

including serving dishes

es, leaving alternate positions in the

 

 

rack free

 

 

 

Amount of detergent required:

5g + 25g (Type B)

20g (Type B)

 

 

 

Rinse aid setting:

4 (Type III)

4 (Type III)

 

 

 

Sample loading arrangements:

Upper basket *)

*) If necessary, you can remove the cup racks on the left-hand side.

Lower basket with cutlery basket*)

Cutlery basket

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*) If necessary, you can remove the cup racks on the left-hand side and/or the beer glass holder.

33

Image 33
Contents ZSF Dear Customer Following symbols are used in the textContents Prior to using for the first time SafetyChild Safety General SafetyDishwasher door safety catch Diagram of Appliance Function button Control PanelRinse Aid SaltWater DoorPrior to Using for the First Time Setting the Water SoftenerSetting manually Setting electronically Water hardness Adjusting the hardness setting Indication onRange Manual Electronic Multi-display Adding dishwasher Salt Only when using the dishwasher for the first timeFilling Up with Rinse Aid Setting the Amount of Rinse Aid Required Activating rinse aid inflow when 3in1 function is selected Loading cutlery and dishes Daily usePots, Pans, Large Plates Loading cutleryCups, Glasses, Coffee Service Raising / Lowering the upper basket Adjusting the Height of the Upper BasketMaximum height of dishes Upper basket Lower basketAdding Detergent Detergent tablets Concentrated detergentsIf you want to use 3in1 products Using 3in1 detergentsIf you do not want to use 3in1 products any more If you want to use 4in1 productsSelecting the dishwashing cycle Cycle Table Selecting a programme Interrupting or Cancelling a dish- washing cycle Cancelling the wash programmeStarting a Dishwashing Cy- cle Switching Off the dish- washer Setting the Delay TimerCare Plus additional function Removing the DishesCleaning the filters Care and cleaningUpper basket spray arm Cleaning the spray arm jetsRemedying small malfunc- tions What to do ifBottom spray arm Malfunction Possible cause RemedyMalfunction Possible cause Remedy Dishes are still dirty If the dishwashing results are not satisfactoryDishes do not dry and are not shin- ing There are dried water drops on the glass- es and dishesDisposal Packaging materialOld appliance Dishwasher Free-standing appliances Technical dataLower basket with cutlery basket Cutlery basket Sample loading arrangementsSafety Information for the Installation Installing the Dishwasher Free-standing appliances Connecting to the water supply Connecting the dishwasherConnecting the inlet hose Permitted water pressureExtension hoses Anti-flood systemSink outlet connection Water drainage if the dishwasher is built- in at high levelChanging a fuse Electrical ConnectionConnecting systems European guarantee Standard guarantee conditionsThis guarantee does not cover ExclusionsPage Customer Care Department 0870 5 929822 612 Subject to change without notice