Zanussi ZSF 6171 Prior to Using for the First Time, Setting the Water Softener, Setting manually

Page 9

Prior to Using for the First Time

3If you wish to use 3 in 1 detergent:

First read the section “Using 3in1 deter- gents”.

Do not fill up with special salt or rinse aid.

If you do not use 3in1 detergent, before using for the first time

1.Set the water softener

2.Fill up with dishwasher salt

3.Fill up with rinse aid

Setting the Water Softener

The water softener must be set manually and elec- tronically:

3To avoid scale deposits on the dishes and in the dishwasher, the dishes must be washed with soft water, i.e. water with a low lime con- tent. The water softener must be set according to the table to the water hardness in the area where you live. Your local water company will be able to give you information about the wa- ter hardness in your area.

The dishwasher must be switched off.

Setting manually:

1.Open the dishwasher door.

2.Remove the lower basket from the dishwasher.

3.Turn water hardness dial on the left wall of the dishwasher interior to O or 1 (see table).

9

Image 9
Contents ZSF Dear Customer Following symbols are used in the textContents Prior to using for the first time SafetyChild Safety General SafetyDishwasher door safety catch Diagram of Appliance Function button Control PanelRinse Aid SaltWater DoorPrior to Using for the First Time Setting the Water SoftenerSetting manually Setting electronically Water hardness Adjusting the hardness setting Indication onRange Manual Electronic Multi-display Adding dishwasher Salt Only when using the dishwasher for the first timeFilling Up with Rinse Aid Setting the Amount of Rinse Aid Required Activating rinse aid inflow when 3in1 function is selected Loading cutlery and dishes Daily usePots, Pans, Large Plates Loading cutleryCups, Glasses, Coffee Service Raising / Lowering the upper basket Adjusting the Height of the Upper BasketMaximum height of dishes Upper basket Lower basketAdding Detergent Detergent tablets Concentrated detergentsIf you want to use 3in1 products Using 3in1 detergentsIf you do not want to use 3in1 products any more If you want to use 4in1 productsSelecting the dishwashing cycle Cycle Table Selecting a programme Interrupting or Cancelling a dish- washing cycle Cancelling the wash programmeStarting a Dishwashing Cy- cle Switching Off the dish- washer Setting the Delay TimerCare Plus additional function Removing the DishesCleaning the filters Care and cleaningUpper basket spray arm Cleaning the spray arm jetsRemedying small malfunc- tions What to do ifBottom spray arm Malfunction Possible cause RemedyMalfunction Possible cause Remedy Dishes are still dirty If the dishwashing results are not satisfactoryDishes do not dry and are not shin- ing There are dried water drops on the glass- es and dishesDisposal Packaging materialOld appliance Dishwasher Free-standing appliances Technical dataLower basket with cutlery basket Cutlery basket Sample loading arrangementsSafety Information for the Installation Installing the Dishwasher Free-standing appliances Connecting to the water supply Connecting the dishwasherConnecting the inlet hose Permitted water pressureExtension hoses Anti-flood systemSink outlet connection Water drainage if the dishwasher is built- in at high levelChanging a fuse Electrical ConnectionConnecting systems European guarantee Standard guarantee conditionsThis guarantee does not cover ExclusionsPage Customer Care Department 0870 5 929822 612 Subject to change without notice