Zanussi ZSF 6171 manual Safety Information for the Installation

Page 34

Installation and connection instructions

1 Safety Information for the Installation

•Only transport the dishwasher in an upright posi- tion, otherwise salt water may run out.

•Before using the dishwasher for the first time, check for any damage caused in transport. Do not under any circumstances connect an appliance that is damaged. In the case of damage, please contact your supplier.

•Never use the dishwasher if the mains cable, water inlet or drain hose are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible.

•Always plug the mains plug into a correctly in- stalled shockproof socket.

•Permanent connection: a permanent connection must only be installed by a trained electrician.

•Prior to using the appliance for the first time, en- sure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate.

•Multi-way plugs / connectors and extension cables must not be used. This could constitute a fire haz- ard through overheating.

•The dishwasher’s cable must only be replaced by a Service Force Engineer.

•A water inlet hose with safety valve must only be replaced by a Service Force Engineer.

34

Image 34

Contents ZSF Following symbols are used in the text Dear CustomerContents Child Safety SafetyPrior to using for the first time General SafetyDishwasher door safety catch Diagram of Appliance Control Panel Function buttonWater SaltRinse Aid DoorSetting the Water Softener Prior to Using for the First TimeSetting manually Water hardness Adjusting the hardness setting Indication on Setting electronicallyRange Manual Electronic Multi-display Only when using the dishwasher for the first time Adding dishwasher SaltFilling Up with Rinse Aid Setting the Amount of Rinse Aid Required Activating rinse aid inflow when 3in1 function is selected Daily use Loading cutlery and dishesLoading cutlery Pots, Pans, Large PlatesCups, Glasses, Coffee Service Maximum height of dishes Adjusting the Height of the Upper BasketRaising / Lowering the upper basket Upper basket Lower basketAdding Detergent Concentrated detergents Detergent tabletsIf you do not want to use 3in1 products any more Using 3in1 detergentsIf you want to use 3in1 products If you want to use 4in1 productsSelecting the dishwashing cycle Cycle Table Selecting a programme Cancelling the wash programme Interrupting or Cancelling a dish- washing cycleStarting a Dishwashing Cy- cle Care Plus additional function Setting the Delay TimerSwitching Off the dish- washer Removing the DishesCare and cleaning Cleaning the filtersCleaning the spray arm jets Upper basket spray armBottom spray arm What to do ifRemedying small malfunc- tions Malfunction Possible cause RemedyMalfunction Possible cause Remedy Dishes do not dry and are not shin- ing If the dishwashing results are not satisfactoryDishes are still dirty There are dried water drops on the glass- es and dishesPackaging material DisposalOld appliance Technical data Dishwasher Free-standing appliancesSample loading arrangements Lower basket with cutlery basket Cutlery basketSafety Information for the Installation Installing the Dishwasher Free-standing appliances Connecting the inlet hose Connecting the dishwasherConnecting to the water supply Permitted water pressureSink outlet connection Anti-flood systemExtension hoses Water drainage if the dishwasher is built- in at high levelElectrical Connection Changing a fuseConnecting systems This guarantee does not cover Standard guarantee conditionsEuropean guarantee ExclusionsPage 0870 5 929 Customer Care Department822 612 Subject to change without notice