Zanussi ZSF 6171 manual Salt, Rinse Aid, Water, Door

Page 8

Multi-display

Set delay	Select
timer	3 in1 function

The multi-displaycan indicate:

–the level of hardness to which the water softener is set.

–whether the rinse aid dispenser has been activat- ed/deactivated.

–the start delay that has been set.

–the estimated time remaining for the current dish- washing cycle.

–what type of error has occurred with the dishwash- er.

Programme progress display: The current stage of the programme is always shown in the programme progress display.

The control indicators have the following meanings:

	Salt 1)	Refill with special salt
	Rinse Aid 1)	Refill with rinse aid
	Water	Turn on the tap

	Filter	Clean the dishwasher's filter sys-
	Filter	tem
		tem

	Door	The door of the dishwasher is
	Door	open
		open

1)These control indicators are never illuminated while a dish- washing cycle is running.

8

Programme progress display

Control indicators

Select Care Plus function

Image 8

Contents ZSF Following symbols are used in the text Dear CustomerContents Safety Prior to using for the first timeChild Safety General SafetyDishwasher door safety catch Diagram of Appliance Control Panel Function buttonSalt Rinse AidWater DoorSetting manually Prior to Using for the First TimeSetting the Water Softener Range Manual Electronic Multi-display Setting electronicallyWater hardness Adjusting the hardness setting Indication on Only when using the dishwasher for the first time Adding dishwasher SaltFilling Up with Rinse Aid Setting the Amount of Rinse Aid Required Activating rinse aid inflow when 3in1 function is selected Daily use Loading cutlery and dishesLoading cutlery Pots, Pans, Large PlatesCups, Glasses, Coffee Service Adjusting the Height of the Upper Basket Raising / Lowering the upper basketMaximum height of dishes Upper basket Lower basketAdding Detergent Concentrated detergents Detergent tabletsUsing 3in1 detergents If you want to use 3in1 productsIf you do not want to use 3in1 products any more If you want to use 4in1 productsSelecting the dishwashing cycle Cycle Table Selecting a programme Starting a Dishwashing Cy- cle Interrupting or Cancelling a dish- washing cycleCancelling the wash programme Setting the Delay Timer Switching Off the dish- washerCare Plus additional function Removing the DishesCare and cleaning Cleaning the filtersCleaning the spray arm jets Upper basket spray armWhat to do if Remedying small malfunc- tionsBottom spray arm Malfunction Possible cause RemedyMalfunction Possible cause Remedy If the dishwashing results are not satisfactory Dishes are still dirtyDishes do not dry and are not shin- ing There are dried water drops on the glass- es and dishesOld appliance DisposalPackaging material Technical data Dishwasher Free-standing appliancesSample loading arrangements Lower basket with cutlery basket Cutlery basketSafety Information for the Installation Installing the Dishwasher Free-standing appliances Connecting the dishwasher Connecting to the water supplyConnecting the inlet hose Permitted water pressureAnti-flood system Extension hosesSink outlet connection Water drainage if the dishwasher is built- in at high levelElectrical Connection Changing a fuseConnecting systems Standard guarantee conditions European guaranteeThis guarantee does not cover ExclusionsPage 0870 5 929 Customer Care Department822 612 Subject to change without notice