
16Setting Surface Controls
Operating single burners
1.Push the desired gas surface control knob in and turn counterclockwise out of the OFF position - Fig.1.
2.Release knob and rotate to (lite) position. Visually check that the needed burner has lit.
3.To adjust, push the knob in and turn counter- clockwise to a flame size setting that best fits your need.
Fig. 1
Operating Min-2-Max™ double burner
1.Push right front surface control knob in and turn counterclockwise out of the OFF
2.Release the knob and rotate to the (lite) position. Note: Although all electronic surface ignitors will spark at the same time, only the selected surface burner will lite.
3.Visually check that both the inner and outer rings are lit
When both burners are lit, continue to turn the control knob counterclockwise to adjust to the desired flame size.
4.If only the inner burner is needed, continue to rotate the gas control knob counterclockwise somewhere past grey
5.Adjust the inner flame to desired size
Burner locations
2 Standard burners - 9,500 BTU - best for most surface cooking requirements.
Large burner - 14,000 BTU- best for bringing large quantities of liquid to boil or when preparing large quantities of food.
Perfect Simmer™ burner
Fig. 2
Fig. 3
Fig. 4