
14Setting for Best Results
Upper oven racks
Always use potholders or oven mitts when removing food or adjusting the oven racks. Wait until the oven has completely cooled if possible. Oven racks may be HOT and may cause burns.
Removing and replacing the offset rack
•To remove pull the oven rack straight forward until it reaches the stop position. Lift up front of oven rack slightly and slide out (not shown).
•To replace, fit the oven rack onto the rack guides on the oven walls. Tilt the front of the rack upward slightly and slide the oven rack completely back into place (not shown).
Removing and replacing the
Luxury-Glide™ oven racks
To remove using one hand, reach through handle opening on top of glide rack and lift up on the release lever located across the lower front of the rack as shown
While holding up on the release lever, pull the glide rack out of the oven until you reach the oven rack stop position
To replace - grasp both upper and lower portions of glide rack, lift and place the rack resting evenly between the oven cavity walls. Tilt the front of the rack upward slightly and slide the rack completely into position. Some force may be necessary to make sure the oven rack has snapped completely back into place.
NOTE
DO NOT attempt to close the oven door until all the oven racks are properly positioned inside the oven cavity. Be sure the glide oven racks make contact with the vertical rack sensor located at the left rear oven cavity wall(see item #17, page 9).
upper rack portion
release
lever lower rack portion
Fig. 1
Fig. 2
Fig. 3