GE EGR3000 Using the Sabbath Feature. on some models, Safety Instructions

Page 19

Using the Sabbath Feature. (on some models)

(Designed for use on the Jewish Sabbath and Holidays)

www.GEAppliances.com

The Sabbath feature can be used for baking/roasting only. It cannot be used for broiling, self-cleaning or Delay Start cooking.

NOTE: The oven light comes on automatically (on some models) when the door is opened and goes off when the door is closed. The bulb may be removed. See the Oven Light Replacement section. On models with a light switch on the control panel, the oven light may be turned on and left on.

Safety Instructions

When the display shows ⊃ the oven is set in Sabbath. When the display shows ⊃ ⊃ the oven is baking/roasting.

How to Set for Regular Baking/Roasting

NOTE: To understand how the oven control works, practice using regular baking (non-Sabbath) before entering Sabbath mode.

Make sure the clock shows the correct time of day and the oven is off.

Touch and hold both the BAKE and BROIL HI/LO pads, at the same time, until the display shows SF.

Tap the CLOCK pad until SAb appears in the display.

Touch the START/ON pad and ⊃ will appear in the display.

Touch the BAKE pad. No signal will be given.

The preset starting temperature will automatically be set to 350.° Tap the + or – pads to increase or decrease the temperature in 25° increments. The temperature can be set between 170° and 550.° No signal or temperature will be given.

Touch the START/ON pad.

After a random delay period of approximately 30 seconds to 1 minute,

⊃⊃ will appear in the display indicating that the oven is baking/roasting. If ⊃ ⊃ doesn’t appear in the display, start again at Step 4.

To adjust the oven temperature, touch the BAKE pad and tap the + or – pads to increase or decrease the temperature in 25° increments. Touch the START/ON pad.

NOTE: The CLEAR/OFF and COOKING TIME pads are active during the Sabbath feature.

Operating Instructions Installation Instructions

How to Set for Timed Baking/Roasting—Immediate Start and Automatic Stop

When the display shows ⊃ the oven is set in Sabbath. When the display shows ⊃ ⊃ the oven is baking/roasting.

NOTE: To understand how the oven control works, practice using regular (non-Sabbath) Immediate Start and Automatic Stop before entering the Sabbath mode.

Make sure the clock shows the correct time of day and the oven is off.

Touch and hold both the BAKE and BROIL HI/LO pads, at the same time, until the display shows SF.

Tap the CLOCK pad until SAb appears in the display.

Touch the START/ON pad and ⊃ will appear in the display.

Touch the COOKING TIME pad.

Touch the + or – pads to set the desired length of cooking time between 1 minute and 9 hours and 59 minutes. The cooking time that you entered will be displayed.

Touch the START/ON pad.

Touch the BAKE pad. No signal will be given.

The preset starting temperature will automatically be set to 350.° Tap the + or – pads to increase or decrease the temperature in 25° increments. The temperature can be set between 170° and 550.° No signal or temperature will be given.

Touch the START/ON pad.

After a random delay period of approximately 30 seconds to 1 minute,

⊃⊃ will appear in the display indicating that the oven is baking/roasting. If ⊃ ⊃ doesn’t appear in the display, start again at Step 7.

To adjust the oven temperature, touch the BAKE pad and tap the + or – pads to increase or decrease the temperature in 25° increments. Touch the START/ON pad.

When cooking is finished, the display will change from ⊃ ⊃ to ⊃, indicating that the oven has turned OFF but is still set in Sabbath. Remove the cooked food.

Troubleshooting Tips Consumer Support

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Write the model and serial numbers here Model # Serial # RangesSelf-Cleaning GasAll ranges can tip and injury could result ANTI-TIP DeviceImportant Safety Notice Instructions Surface Burners Cook Meat and Poultry THOROUGHLY… Instructions Operating Instructions SELF-CLEANING OvenConsumer Using the gas surface burnersInstructions Instructions OperatingCase of Power Failure SafetyTop-of-Range Cookware Consumer Support Troubleshooting Tips Using the oven controlsInstallation Instructions Oven Control, Clock and Timer Features and Settings Consumer Support Using the ovenAluminum Foil How to Set the Oven for Baking or RoastingPreheating and Pan Placement TipsBroiling Guide How to Set the Oven for BroilingHI Broil To Set the Clock Using the clock and timerInstallation To Set the TimerEnd of Cycle Tones on some models To Reset the TimerTo Cancel the Timer Touch the Kitchen Timer ON/OFFHow to Set a Delayed Start and Automatic Stop Using the timed baking and roasting featuresSafety Instructions Special features of your oven controlHour Shut-Off Designed for use on the Jewish Sabbath and Holidays Using the Sabbath Feature. on some modelsSafety Instructions How to Set for Regular Baking/RoastingHow to Exit the Sabbath Feature Type of margarine will affect baking performance Adjust the oven thermostat-Do it yourselfInstructions Troubleshooting Tips Consumer Support To Adjust the ThermostatBefore a Clean Cycle Using the self-cleaning ovenHow to Set the Oven for Cleaning Tips Consumer Support How to Delay the Start of CleaningTo Stop a Clean Cycle After a Clean CycleStandard Twin Burner Assemblies on some models Care and cleaning of the rangeSafety Burner heads After cleaningReplacement Burner capsTo Order Troubleshooting Tips Consumer SupportBurner Grates Cooktop SurfaceBroiler Pan and Grid Troubleshooting TipsLift-Off Oven Door Oven BottomRemovable Storage Drawer on some models Removable Kick Panel on some modelsLower Control Panel Front Manifold Panel and Knobs Oven Air VentsTo replace cover Oven Light ReplacementOven Shelves Do not remove any screws to remove the coverMaterials YOU MAY Need For Your SafetyPart Included Tools YOU will NeedInstallation Instructions Dimensions and Clearances Location ANTI-TIP DeviceProvide Adequate GAS Supply Connect the Range to GASInstallation Instructions Rigid Pipe Hookup Options Pressure regulator Manifold pipe Electrical Requirements Electrical ConnectionsSeal the Openings Check Ignition of Surface BurnersCheck Ignition of Oven Burner To remove the oven bottom Leveling the RangeWhen ALL Hookups are Completed Installing the ANTI-TIP DeviceProblem Possible Causes What To Do Before you call for service…Oven temperature See the Using the clock and timer sectionSee the Care and cleaning of the range section See the Installation of the range sectionOven door will not After a clean cycle Oven not clean afterClean cycle Excessive smokingStrong odor Power outageClock flashes Emitting from the ventOperating Instructions Safety Instructions We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Page Consumer Support Looking For Something More? AccessoriesWhat GE Will Not Cover Instructions Safety InstructionsOperating GE Will ReplaceWhat Camco Will Not Cover Camco Will ReplaceReal Life Design Studio Schedule ServiceParts and Accessories Consumer Support GE Appliances Website

EGR3000 specifications

The GE EGR3000 is a cutting-edge gas turbine engine designed to meet the demands of modern power generation and transportation applications. This innovative engine showcases a range of advanced features and technologies that enhance its performance, efficiency, and reliability.

One of the key characteristics of the EGR3000 is its exceptional efficiency. The engine employs an advanced thermodynamic cycle, which incorporates a high compression ratio and an innovative cooling design. This efficiency is particularly important in reducing fuel consumption and emissions, making it an environmentally friendly option compared to traditional gas turbines. The EGR3000 boasts a thermal efficiency rating that places it among the highest in its class.

The EGR3000 utilizes a dual-fuel capability, allowing it to operate on a variety of fuels. This flexibility is crucial for operators looking to optimize their fuel use based on availability and cost, adding to the engine's versatility. Additionally, the engine is designed to accommodate both natural gas and liquid fuels, thereby enhancing its operational range.

Another notable feature is the engine's advanced modular design. This allows for easier maintenance and quicker turnaround times, minimizing downtime and operational costs for power plants and industrial facilities. The modular components can be replaced or serviced individually, which simplifies maintenance procedures and enhances overall reliability.

In terms of technology, the EGR3000 incorporates sophisticated materials and coatings that improve thermal resistance and durability. High-performance blades and combustion chambers are designed to withstand extreme temperatures, resulting in longer service life and reduced maintenance frequency. The engine also employs digital control systems that optimize performance parameters in real-time, ensuring peak efficiency under varying load conditions.

Emissions control is a critical aspect of the EGR3000's design. It features advanced combustion technology that minimizes NOx and CO2 emissions, aligning with stringent environmental regulations. The engine's design enables it to operate with lean-burn technology, further supporting reduced environmental impact.

Overall, the GE EGR3000 stands out as a powerful and efficient gas turbine solution. Its combination of high efficiency, fuel flexibility, modular design, and advanced emission control technologies makes it an ideal choice for various applications, including power generation and industrial processes. As energy demands continue to evolve, the EGR3000 positions itself as a reliable and forward-thinking solution for today’s energy landscape.
Top Page Image Contents