Safety Instructions
Installation of the range.
Seal the Openings
Seal any openings in the wall behind the range and in the floor under the range when hookups are completed.
Operating Instructions
Assemble Surface Burners
Assemble the side burners as shown.
Side
Grate
Burner cap
Burner head 
and electrode
Place the burner caps on the cooktop. Make sure the caps are placed in the correct locations. There is one oval (center) head and cap asssembly. There is one small, one medium, one large and one extra large burner cap.
| Oval head and cap |
|
Medium burner | assembly | Small burner |
| ||
head and cap |
| head and cap |
Tips Installation Instructions
Assemble the center burner. Make sure that the locking feet on the center grate hook over the side grates.
Center Griddle
Burner head and
cap assembly
Electrode
CAUTION: Do not operate the burner without all burner parts in place.
| Front of range |
Large burner | Extra large burner |
head and cap | head and cap |
Make sure the slot in the burner head is positioned over the electrode.
Troubleshooting
Slot
Electrode
Consumer Support
Check Ignition of Surface Burners
Operation of all cooktop burners should be checked after the range and gas supply lines have been carefully checked for leaks.
Electric Ignition
Select a top burner knob and simultaneously push in and turn to LITE position. You will hear a clicking sound indicating proper operation of the spark module. Once the air has been purged from the supply lines, burners should light within 4 seconds. After burner lights, rotate knob out of the LITE position. Try each burner in succession until all burners have been checked.
50