USING YOUR OVEN
(continued)
Oven Shelves
The shelves are |
| |
designed with stop- |
| |
Bump | ||
locks so when placed | ||
| ||
| ||
correctly on the shelf |
| |
supports, they will stop |
| |
before coming |
| |
completely out of the |
| |
oven and will not tilt |
| |
when you are removing |
| |
food from them or |
| |
placing food on them. |
|
When placing cookware on a shelf, pull the shelf out to the bump on the shelf support. Place the cookware on the shelf, then slide the shelf back into the oven.
This will eliminate reaching into the hot oven.
To remove a shelf from the oven, pull it
toward you, tilt the front
end upward and pull the shelf out.
To replace, place the shelf on the shelf support with the
(curved extension of the
shelf) facing up and toward the rear of the oven. Tilt up the front and push the shelf toward the back of the oven until it goes past the bump on the shelf support. Then lower the front of the shelf and push it all the way back.
Shelf Positions
The oven has five shelf supports for baking and roasting identified in this illustration as A (bottom), B, C, D and E (top). It also has a special low shelf position (R) for roasting extra large items, such as a large
E
D
C
B
A
R
Oven Vents
The oven is vented through duct openings at the rear of the cooktop. See the Features section. Do not block these openings when cooking in the
•The vent openings and nearby surfaces may become hot. Do not touch them.
•Handles of pots and pans on the cooktop may become hot if left too close to the vent.
•Metal items will become very hot if they are left on the cooktop and could cause burns.
•Do not leave any items on the cooktop. The hot air from the vent may ignite flammable items and will increase pressure in closed containers, which may cause them to burst.
•Do not leave plastic
items on the cooktop— they may melt if left too close to the vent.
Vent appearance and location vary.
12