GE 49-8780 manual Installation of the range, Wiring must conform to National Electric Codes

Page 38

Customer Service Troubleshooting Tips Installation Instructions Operating Instructions Safety Information

Installation of the range.

Read these instructions completely and carefully.

Before You Begin

IMPORTANT: Save these instructions for the local electrical inspector’s use.

IMPORTANT: OBSERVE ALL GOVERNING CODES AND

ORDINANCES.

NOTE TO INSTALLER: Leave these instructions with the appliance after installation is completed.

NOTE TO CONSUMER: Keep this Owner’s Manual and

Installation Instructions for future use.

NOTE: This appliance must be properly grounded.

Tools You Will Need

■Large blade screwdriver

■1/4″ hex head nutdriver

■Channel lock pliers or small ratchet wrench with 3/16″ socket (for leveling range)

Electrical Requirements

CAUTION, FOR PERSONAL SAFETY: DO NOT USE AN

EXTENSION CORD WITH THIS APPLIANCE.

REMOVE HOUSE FUSE OR OPEN CIRCUIT BREAKER

BEFORE BEGINNING INSTALLATION.

This appliance must be supplied with the proper voltage and frequency, and connected to an individual, properly grounded branch circuit, protected by a circuit breaker or time delay fuse, as noted on the rating plate.

Wiring must conform to National Electric Codes.

If the electric service provided does not meet the above specifications, have a licensed electrician install an approved outlet.

Because range terminals are not accessible after range is in position, flexible service conduit or cord must be used.

38

Image 38

Contents GE Answer Center Write the model and serial numbers here Staple sales slip or cancelled check hereCongratulations You Are Now Part of the GE Family You can find them on a label behindGE & You Service Partnership All ranges can tip and injury could result Fiberglass insulation in self-clean ovens gives off a verySmall amount of carbon monoxide during the cleaning cycle California Safe Drinking Water and Toxic EnforcementSafety Precautions Safety Information When Cooking PORK… Oven SELF-CLEANING Oven Surface Cooking Units Troubleshooting Tips Customer Service Radiant Surface UnitsREMEMBER… Wok Cooking Using the surface unitsHow to Set About the radiant surface units… glass cooktops only Do not use the surface as a cutting boardSelecting types of cookware. glass cooktops only Using the oven controls Clock and Timer FeaturesOven Control Settings Using the self-cleaning oven sectionUsing the oven Before you begin…Aluminum Foil Preheating and Pan PlacementHow to Set the Oven for Broiling HI Broil. To change from HI Broil to LO BroilBroiling guide CommentsUsing the clock and timer Using the timed baking and roasting features How to Set an Immediate Start Automatic StopHow to Set a Delay Start and Automatic Stop Make sure the oven clock shows the correct time of dayAdjust the oven thermostat-Do it yourself To Adjust the ThermostatUsing the self-cleaning oven Before a Clean CycleHow to Set the Oven for Cleaning Press the Auto Self Clean padHow to Delay the Start of Cleaning After a Clean CycleCare and cleaning of the range Control Panel and KnobsOven Shelves Painted SurfacesSure Grip Handle Lift-Off Oven Door To clean the inside of the doorTo clean the outside of the door Do not lift the door by the handleTo remove the cover Oven Light ReplacementOven Heating Elements Do not remove any screws to remove the coverOperating Instructions Safety Information To remove a surface unit To replace a surface unitTo replace Cooktop Surface LightTo remove To remove the storage drawer How to Remove the Storage Drawer to Clean Under the RangeBroiler Pan & Grid To replace the storage drawerFor heavy, burned-on soil Cleaning the glass cooktopDaily Cleaning National Parts CenterSpecial Care Installation of the range Wiring must conform to National Electric CodesPrepare the Opening Flooring Under the Range Prepare for Electrical ConnectionPower Cord Strain Relief Installation Strain relief, they can be removed for better fitWire Power Cord Installation Do not remove ground strap connectionBefore After Wire Conduit Installation Connector block terminal Bare wire Final Check Anti-Tip Bracket InstallationLeveling the Range Oven will not work Before you call for service…Control signals after Entering cook timeSee the Broiling guide Food does notBroil properly At Broil Broil HI/LO pad Food does not bake Oven temperatureClock and timer Or roast properlyWhen you wanted Self-cleanSelf-clean cycle Oven will notExcessive smoking Oven not cleanAfter a clean cycle Oven door willLock light is on When you wantPower outage To cookSurface units Surface units will not Frequent cyclingOff and on Maintain a rolling boilProperly Surface unitsNot functioning Cooktop feels hotWe Will Replace, At No Charge To You GE Electric Range WarrantyFive Years Replacement glass cooktop if it should crack due What GE Will Not CoverTDD 800-TDD-GEAC Service Telephone NumbersIn-Home Repair Service 800-GE-CARES