GE 49-8780, 164D3333P034 manual How to Set the Oven for Cleaning, Press the Auto Self Clean pad

Page 26

Customer Service Troubleshooting Tips Installation Instructions Operating Instructions Safety Information

Using the self-cleaning oven.

Never force the latch handle. Forcing the handle will damage the door lock mechanism.

How to Set the Oven for Cleaning

1 Latch the door.

				Press the AUTO SELF CLEAN pad.
			2	Press the AUTO SELF CLEAN pad.
				Using the + or – pad, enter the desired clean time.
			3	Using the + or – pad, enter the desired clean time.
		Clean cycle time is normally 3 hours. You can change
		the clean time to between 2 hours and 4 hours,
		depending on how dirty your oven is.
or		The self-clean cycle will automatically begin after CLEAN
or		The self-clean cycle will automatically begin after CLEAN

is displayed and the time for the clean cycle is set. The words ON and LOCK will appear in the display. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCK light goes off.

When the LOCK light is off, slide the latch handle to the left as far as it will go and open the door.

■The word door will be displayed, the word LOCK will flash and the oven control will signal if you set the clean cycle and forget to close the oven door.

■To stop a clean cycle, press the CLEAR/OFF pad. When the LOCK light goes off and the oven has cooled below the locking temperature, open the door.

26

Image 26

Contents GE Answer Center Write the model and serial numbers here Staple sales slip or cancelled check hereCongratulations You Are Now Part of the GE Family You can find them on a label behindGE & You Service Partnership All ranges can tip and injury could result Fiberglass insulation in self-clean ovens gives off a verySmall amount of carbon monoxide during the cleaning cycle California Safe Drinking Water and Toxic EnforcementSafety Precautions Safety Information When Cooking PORK… Oven SELF-CLEANING Oven Surface Cooking Units Troubleshooting Tips Customer Service Radiant Surface UnitsREMEMBER… Wok Cooking Using the surface unitsHow to Set About the radiant surface units… glass cooktops only Do not use the surface as a cutting boardSelecting types of cookware. glass cooktops only Using the oven controls Clock and Timer FeaturesOven Control Settings Using the self-cleaning oven sectionUsing the oven Before you begin…Aluminum Foil Preheating and Pan PlacementHow to Set the Oven for Broiling HI Broil. To change from HI Broil to LO BroilBroiling guide CommentsUsing the clock and timer Using the timed baking and roasting features How to Set an Immediate Start Automatic StopHow to Set a Delay Start and Automatic Stop Make sure the oven clock shows the correct time of dayAdjust the oven thermostat-Do it yourself To Adjust the ThermostatUsing the self-cleaning oven Before a Clean CycleHow to Set the Oven for Cleaning Press the Auto Self Clean padHow to Delay the Start of Cleaning After a Clean CycleCare and cleaning of the range Control Panel and KnobsOven Shelves Painted SurfacesSure Grip Handle Lift-Off Oven Door To clean the inside of the doorTo clean the outside of the door Do not lift the door by the handleTo remove the cover Oven Light ReplacementOven Heating Elements Do not remove any screws to remove the coverOperating Instructions Safety Information To remove a surface unit To replace a surface unitTo replace Cooktop Surface LightTo remove To remove the storage drawer How to Remove the Storage Drawer to Clean Under the RangeBroiler Pan & Grid To replace the storage drawerFor heavy, burned-on soil Cleaning the glass cooktopDaily Cleaning National Parts CenterSpecial Care Installation of the range Wiring must conform to National Electric CodesPrepare the Opening Flooring Under the Range Prepare for Electrical ConnectionPower Cord Strain Relief Installation Strain relief, they can be removed for better fitWire Power Cord Installation Do not remove ground strap connectionBefore After Wire Conduit Installation Connector block terminal Bare wire Final Check Anti-Tip Bracket InstallationLeveling the Range Oven will not work Before you call for service…Control signals after Entering cook timeSee the Broiling guide Food does notBroil properly At Broil Broil HI/LO pad Food does not bake Oven temperatureClock and timer Or roast properlyWhen you wanted Self-cleanSelf-clean cycle Oven will notExcessive smoking Oven not cleanAfter a clean cycle Oven door willLock light is on When you wantPower outage To cookSurface units Surface units will not Frequent cyclingOff and on Maintain a rolling boilProperly Surface unitsNot functioning Cooktop feels hotWe Will Replace, At No Charge To You GE Electric Range WarrantyFive Years Replacement glass cooktop if it should crack due What GE Will Not CoverTDD 800-TDD-GEAC Service Telephone NumbersIn-Home Repair Service 800-GE-CARES