Using the oven, To light the oven pilot | GE 164D3333P185-1 manual

Instructions Safety Instructions

Using the oven.

Throughout this manual, features and appearance may vary from your model.

Lighting Instructions for Electric Ignition Models

	The oven burner is lighted by electric ignition.	After the oven reaches the selected
	To light the burner, turn the OVEN TEMP	temperature the oven burner cycles on
		and off to maintain the selected
	knob to the desired temperature. The
		temperature.
	burner should light within 30-90 seconds.

Power Outage—Electric Ignition Models

Installation Instructions Care and Cleaning Operating

A burner in use when an electrical power failure occurs will continue to operate normally. Your oven may be used during an electrical power outage by carefully following the steps below.

To light the oven pilot during an electrical power outage:

Be sure the OVEN TEMP knob is in the OFF position.

Open both the oven and broiler doors and wait 5 minutes to allow any pilot gas to dissipate.

Unplug the range from the wall outlet, turn off the circuit breaker, or remove the fuse to avoid accidental ignition of the oven if electrical power is restored while you are lighting the pilot.

Remove the broiler pan.

Locate the oven pilot assembly by looking into the broiler opening. The pilot is at the back of the broiler compartment, on the left side of the burner.

NOTE: The oven must be at room temperature before you should attempt to light the oven pilot manually.

Turn the OVEN TEMP knob to the desired temperature setting.

Light the pilot with a match and withdraw your arm immediately because the oven burner may light in as little as 20 seconds.

Replace the broiler pan and close the oven and broiler doors.

NOTE: It is necessary to light the pilot manually each time the oven is used during a power outage.

Lighting Instructions for Standing Pilot Models

Customer Service Troubleshooting Tips

The standing oven pilot must be lit initially.

To light the oven pilot:

Be sure the OVEN TEMP knob is in the OFF position.

Remove the oven bottom. See the Care and cleaning of the range section.

Find the oven pilot port at the back of the oven.

Using a long match or match holder, reach in and light the oven pilot.

Replace the oven bottom and close the door. Your oven and broiler are now ready for use.

■To light the oven burner, turn the OVEN TEMP knob to the desired temperature. The burner should light within 60 seconds.

■Power failure? An electrical power failure will not affect the standing oven pilot.

164D3333P185-1 specifications

The GE 164D3333P185-1 is a high-performance component designed for industrial applications, particularly in the field of electrical engineering. This product demonstrates a blend of advanced technology, reliability, and efficiency, which makes it a preferred choice for various sectors.

One of the standout features of the GE 164D3333P185-1 is its robust design. Constructed with durable materials, it is built to withstand challenging environmental conditions. This durability ensures that it maintains performance integrity over time, minimizing the need for maintenance and reducing downtime in industrial operations.

The component incorporates state-of-the-art technologies that enhance its functionality. It utilizes advanced sensor technology, which allows for precise monitoring and control of electrical systems. This capability is crucial in applications where accuracy and reliability are paramount. Additionally, the GE 164D3333P185-1 is equipped with innovative power management features that improve energy efficiency, leading to cost savings in operational expenses.

Another key characteristic of the GE 164D3333P185-1 is its versatility. It can be seamlessly integrated into various systems, whether in manufacturing, energy production, or commercial applications. This adaptability makes it a valuable asset in the ever-evolving industrial landscape.

The GE 164D3333P185-1 also promotes enhanced safety features. It includes built-in protection mechanisms that guard against electrical surges and faults, ensuring a safe operational environment. This attribute is particularly important for organizations that prioritize safety and risk management as part of their operational protocols.

Moreover, the ease of installation and user-friendly interface of the GE 164D3333P185-1 simplify the integration process. Technicians can efficiently set up and operate the component without extensive training, leading to quicker project turnaround times.

In summary, the GE 164D3333P185-1 is an exemplary product that showcases the best of modern engineering. With its robust design, advanced technologies, energy efficiency, safety features, and versatility, it stands as a critical component for industries looking to enhance their operational capabilities. Adopting the GE 164D3333P185-1 means investing in a future-proof solution that addresses the demands of today's dynamic industrial environments.