If Range Has Electric Ignition, Oven Operation

Read these instructions completely and carefully.

If Range Has Electric Ignition

There are separate ignition devices for the left	In the event of an electrical power failure, the top
and right hand surface burners. Both of these	burners can still be used. To light a burner, hold a
ignitors are ON when any knob is turned to the	lighted kitchen match adjacent to the top burner
LITE setting. The ignitors will spark as long as any	to be used and turn valve knob to LITE. USE
of the top burner knobs are at the LITE setting.	EXTREME CAUTION.

Oven Pilot Adjustment

Safety Instructions Operating Instructions

On pilot models remove thermostat knob.

Check position of pilot gas selector to make sure selector is turned to the correct position for the type of gas that is to be used. To change to LP, insert small blade screwdriver in slot and turn fully clockwise so that indicator points to LP. To change to NAT, turn fully counterclockwise so that indicator points to NAT.

■If desired, the gas to the oven pilot can be turned off by turning the selector so the pointer is at the OFF position, midway between the LP and NAT settings. (Thermostat on your range may not appear exactly as shown in diagram.)

■On electric ignition models the gas to the oven burner can be turned off. A manual shut-off valve is provided on manifold pipe.

Oven pilot selector key

switches from LP to NATPointer (vice versa).

Front view

Care and Cleaning Installation Instructions

Oven Operation

With the oven thermostat dial in the OFF position, light standing pilot on oven burner pilot assembly. On electric ignition models do not attempt to manually light the oven pilot.

Turn the thermostat dial to any temperature setting. The oven pilot flame will enlarge and engulf the mercury bulb. After approximately 30–45 seconds the main burner will come on.

The oven can be used during periods of power outage. (See the Using the surface units section.)

With control knob in OFF position, light standing pilot. Flame should appear as shown.

Mercury bulb

Troubleshooting Tips Customer Service

164D3333P185-1 specifications

The GE 164D3333P185-1 is a high-performance component designed for industrial applications, particularly in the field of electrical engineering. This product demonstrates a blend of advanced technology, reliability, and efficiency, which makes it a preferred choice for various sectors.

One of the standout features of the GE 164D3333P185-1 is its robust design. Constructed with durable materials, it is built to withstand challenging environmental conditions. This durability ensures that it maintains performance integrity over time, minimizing the need for maintenance and reducing downtime in industrial operations.

The component incorporates state-of-the-art technologies that enhance its functionality. It utilizes advanced sensor technology, which allows for precise monitoring and control of electrical systems. This capability is crucial in applications where accuracy and reliability are paramount. Additionally, the GE 164D3333P185-1 is equipped with innovative power management features that improve energy efficiency, leading to cost savings in operational expenses.

Another key characteristic of the GE 164D3333P185-1 is its versatility. It can be seamlessly integrated into various systems, whether in manufacturing, energy production, or commercial applications. This adaptability makes it a valuable asset in the ever-evolving industrial landscape.

The GE 164D3333P185-1 also promotes enhanced safety features. It includes built-in protection mechanisms that guard against electrical surges and faults, ensuring a safe operational environment. This attribute is particularly important for organizations that prioritize safety and risk management as part of their operational protocols.

Moreover, the ease of installation and user-friendly interface of the GE 164D3333P185-1 simplify the integration process. Technicians can efficiently set up and operate the component without extensive training, leading to quicker project turnaround times.

In summary, the GE 164D3333P185-1 is an exemplary product that showcases the best of modern engineering. With its robust design, advanced technologies, energy efficiency, safety features, and versatility, it stands as a critical component for industries looking to enhance their operational capabilities. Adopting the GE 164D3333P185-1 means investing in a future-proof solution that addresses the demands of today's dynamic industrial environments.