Bosch Appliances HGS3063UC manual Settings, Setting a surface burner, Setting the Clock

Page 20

Setting a surface burner

1.Place cooking utensil on center of surface burner grate. Make sure the cooking untensil is centered and stable on the grate.

2.Push the desired surface control knob in and turn counterclockwise out of the OFF position (see Fig.1).

3.Release the knob and rotate to the LITE position.

4.Visually check that the gas burner has lit.

5.Push the control knob in and turn counterclockwise to the desired flame size. The control knobs do not have to be set at a particular setting. Use the control knob markings and adjust the flame as needed..

Push Knob In

Then Turn Counterclockwise

Fig. 1

Notes:

•DO NOT cook with the surface control knob left in the LITE position. The electronic ignitor will continue to spark if the control knob is left in the LITE position.

•When setting any surface control knob to the LITE position, all electronic surface ignitors will spark at the same time. However, only the surface burner you are setting will ignite.

•In the event of an electrical power outage, the surface burners can be lit manually. To light a surface burner, hold a lit match to the burner head, then slowly turn the surface control knob to LITE. After burner lights push in and turn knob to desired setting. Use caution when lighting surface burners manually.

Settings

Setting the Clock

When the appliance is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash "12:00".

To set the analog clock:

1.Press "CLOCK" once (do not hold pad down).

2.Within 5 seconds, press and hold "+" or “-” until the desired time of day appears in the display.

Note: The clock cannot be changed during any timed bake or self-clean cycle.

Changing between continuous bake setting or 12-Hour Energy Saving feature

The oven control has a built-in 12-Hour Energy Saving feature that will shut off the oven if the control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.

Changing to continuous bake setting:

1.Press and hold “TIMER On/Off” down for 5 seconds until tone is heard, " — — hr" will appear in display for continuous cooking. The current time of day will return to the display.

2.To cancel the continuous bake setting, press and hold for 5 seconds until tone is heard. "12hr" will appear in display indicating that the control has returned to the 12-Hour Energy Saving feature.

Temperature conversion

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1.Press “BROIL” . "— —" appears in the display.

2.Press and hold “+” the until "HI" appears in the display.

3.Press and hold “BROIL” until °F or °C appears in the display.

4.Press the “+” or “-” to change °F to °C or °C to °F.

5.Press any control pad to return to normal operating mode.

English 17

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Use and Care Manual Page Table of Contents About This Manual How This Manual is OrganizedProper Installation and Maintenance SafetyImportant Safety Instructions Gas Safety Fire SafetyBurn Prevention Child SafetyCleaning Safety Cookware Safety Conversion to Liquified Petroleum GasGetting Started PartsAccessories RackCooktops Oven BottomControl Before Using the Oven for the First Time Control KeypadsGetting the Most Out of Your Appliance General TipsCondensation Operating the Oven LightOperation About the ApplianceOperating the Oven Baking layer cakes with 1 or 2 oven racksSetting timed bake and delayed timed bake features When the set bake time runs outBroil Convection some modelsOperating the Gas Cooktop Cookware material typesUsing proper cookware Setting proper burner flame heightSetting surface controls Center Oval Burner some modelsSettings Setting a surface burnerSetting the Clock Temperature conversionSetting a silent control panel Setting oven lockoutSetting the minute timer To change the timer while it is in useSelf-Clean Cleaning and MaintenanceCleaning Stopping or interrupting a self-clean cycle Avoid These CleanersCleaning Guide When the self-clean cycle has completedCooktop Cleaning and Maintenance Cleaning sectionTo clean the burner head ignition ports To clean the surface burner headsTo replace the oven light bulb MaintenanceReplacing an Oven Light Removing the Oven Door To remove the oven doorTo replace the oven door Service Before Calling ServiceTroubleshooting Chart Oven Problem Possible Causes and Suggested SolutionsAppliance does not operate in this checklist How to Obtain Service or Parts Data PlateWhat this Warranty Covers & Who it Applies to How Long the Warranty LastsOut of Warranty Product Warranty ExclusionsHow to Obtain Warranty Service Concernant ce guide SécuritéMise en œuvre Pour obtenir le maximum de cet appareilConcernant ce guide Organisation du guideInstructions de sécurité importantes Installation et entretien appropriésSécurité Sécurité pour le gaz Sécurité pour le feuNettoyage sécuritaire Sécurité pour les enfantsÉviter les brûlures Sécurité avec les casseroles Conversion au gaz de pétrole liquéfiéMise en œuvre PiècesAccessoires GrilleFond du four RemarqueContrôle Avant d’utiliser le four pour la première fois Touches du panneau de contrôlePour obtenir le maximum de cet appareil GénéralitésFonctionnement de l’éclairage du four Fonctionnement Concernant cet appareilFonctionnement du four CuissonRéglage de la cuisson minutée et cuisson différée Lorsque la durée de cuisson se termineGril Convection certains modèlesPour régler le gril Les avantagesFonctionnement de la surface de cuisson à gaz Type de matériauxUtilisation de la convection Pour la cuisson Pour le rôtissageBrûleur central ovale certains modèles Utilisation de casseroles appropriéesRéglage des contrôles de surface Réglages Régler le brûleur de surfaceRéglage de la pendule Conversion de températurePour un panneau de contrôle silencieux Réglage du verrouillage de fourRéglage de la minuterie Pour changer la minuterie pendant l’utilisationNettoyage et entretien NettoyageAutonettoyage Préparation pour l’autonettoyagePièces Recommandations Arrêt ou interruption de l’autonettoyageÉviter ces produits nettoyants Guide de nettoyageNettoyage et entretien de la surface de cuisson Nettoyage et entretienNettoyer les ports d’allumage des têtes de brûleurs Nettoyer les têtes de brûleursRemplacer l’ampoule du four Remplacement de l’ampoule du fourEntretien Retrait de la porte Retrait de la portePour remettre la porte du four Problème avec le four Causes possibles et suggestions Avant d’effectuer un appel de serviceGuide de dépannage Contrôles du four Contrôles de surfaceSection Nettoyage et entretien Réglages des contrôles du four Plaque signalétiqueComment obtenir un service ou des pièces Couverture de la garantie Durée de la garantieProduit hors garantie Exclusions à la garantiePour un service sous garantie Français Page Contenido ¿Tiene usted preguntas?Acerca de este manual Cómo está organizado este manualInstalación y mantenimiento correcto SeguridadInstrucciones Importantes de Seguridad Manejo seguro del gas Seguridad contra incendiosSeguridad durante la limpieza Prevención de quemadurasSeguridad para los niños Conversión a gas licuado de petróleo Seguridad de los utensilios de cocinarComenzar PartesAbertura de ventilación del horno Ventilador de convección algunos modelosAccessorios RejillaParrillas Piso del hornoControl Antes de usar el horno por primera vez Botones de controlSacar el mayor provecho de su aparato Consejos generalesCondensación Cómo operar la luz del hornoOperación Acerca del aparatoCómo operar el horno Hornear pasteles en capas con 1 o 2 rejillasCuando termina el tiempo de hornear programado Asar Para usar el modo de AsarConvección algunos modelos Beneficios de la convecciónCómo funciona la convección Cómo usar el modo de convección Al hornearPara configurar el modo de convección Cómo operar la parrilla de gasTipos de materiales para utensilios de cocina Usar utensilios apropiados de cocinaConfigurar los controles de la parrilla Configurar un quemador de la parrillaQuemador central ovalado algunos modelos NotasConfiguraciones y ajustes Configurar el relojConfigurar un panel de control silencioso Configurar el bloqueo del hornoConfigurar el temporizador de minutos Pulse Timer On/OffAutolimpieza Limpieza y MantenimientoLimpieza Detener o interrumpir un ciclo de autolimpieza Evitar estos detergentes/limpiadoresGuía de Limpieza Cuando termina el ciclo de autolimpiezaLimpieza y Mantenimiento de la Parrilla Sección Cuidado y LimpiezaPara limpiar los puertos de ignición de los quemadores Para limpiar los quemadores de la parrillaPara reemplazar el foco de luz en el horno MantenimientoCómo reemplazar un foco en el horno Cómo quitar la puerta del horno Para quitar la puerta del hornoCerradura Abra Para reemplazar la puerta del hornoTabla para resolver problemas Problema del Horno Posibles Causas y Soluciones SugeridasServicio Antes de solicitar servicioAparato completo no funciona en esta lista de chequeo LimpiezaControles del horno Asar en la sección Configurar los controles del horno Placa con datosCómo obtener servicio o refacciones Del hornoCobertura de esta garantía y para quiénes aplica Duración de la garantíaReparación/Reemplazo como su remedio exclusivo Producto fuera de garantíaCómo obtener servicio de garantía
Top Page Image Contents