Sennheiser EW 300 IEM G2 manual Preparing the components for use, Mounting the transmitter feet

Page 10

Preparing the components for use

SR 300 IEM G2 stereo transmitter

Mounting the transmitter feet

To ensure that the transmitter cannot slip on the surface on which it is placed, four self-adhesive soft rubber feet are supplied.

Ensure that the base of the transmitter is clean and free from grease before mounting the rubber feet.

Fix the rubber feet to the base of the transmitter by peeling of the safety paper and fitting them as shown in the digram on the left.

Attention!

Some furniture surfaces have been treated with varnish, polish or synthetics which might cause stains when they come into contact with other synthetics. Despite a thorough testing of the synthetics used by us, we cannot rule out the possibility of staining.

Connecting the antenna

The supplied telescopic antenna can be mounted quickly and easily to the rear of the transmitter and is suitable for all applications where – good transmission conditions provided – a wireless transmission system is to be used without a large amount of installation work.

Connect the telescopic antenna to the BNC socket at the rear of the transmitter.

Pull the end cap to extend the telescopic antenna .

Use a remote antenna (available as an accessory) when the transmitter position is not the best antenna position for optimum transmission.

Connecting the mains unit

The transmitter is powered via a mains unit.

Pass the cable through the cable grip .

Insert the DC connector on the mains cable into the DC socket .

Connecting the amplifier/mixing console

Connect the amplifier/mixing console to the XLR-3F sockets (left and

MONO) or (right).

Both balanced and unbalanced connection is possible (see “Connector assignment” on page 73).

Note:

Any unit that is only suitable for mono operation must be connected to XLR-3F socket . In this case, set the transmitter to mono operation via the menu.

48

Page 9 Page 11
Image 10
Page 9 Page 11
Contents W300 IEM Thank you for choosing Sennheiser Contents Ew 300 IEM G2 system Channel bank systemSafety instructions System componentsOverview of operating controls SR 300 IEM G2 stereo transmitterEK 300 IEM G2 stereo receiver Indications and displays on the transmitter Indications and displays on the receiverPilot display RF signal indicationMute display Display backlightingConnecting the amplifier/mixing console Connecting the antennaConnecting the mains unit Preparing the components for useService interface Connecting the headphones/monitoring the audio signalVolume up? no Rack adapter and antenna mountBNC extension cables using the supplied plain Inserting and replacing the batteries Connecting the headphonesInserting and charging the accupack Adjusting the volume Using the componentsSwitching the components on/off Switching the transmitter on/offActivating/deactivating the lock mode Adjusting the balanceAttaching the receiver to clothing Operating menu ButtonsOverview of menus Working with the operating menuGetting into the operating menu Adjusting a settingStoring a setting Selecting a menu790.250 MHz 807.900 MHz Operating menu of the stereo transmitter786.300 MHz 790.250 MHz 786.300 MHz 797.075 MHzOff IiiiiiStereo MonoExit Operating menu of the stereo receiverName PLT. on Switching between the channels in a channel bank Adjustment tips for the operating menuSwitching between channel banks Scanning the channel banks for free channels receiver onlyStarting the scan and storing the scan result Adjusting the squelch threshold receiver onlyMulti-channel operation Releasing locked channelsStereo/FOCUS selection receiver only Adjusting the sensitivity transmitter onlyIMPORTANT! Notes SR 300 IEM G2 stereo transmitter Selecting the standard displayEntering a name EK 300 IEM stereo receiverLoading the factory-preset default settings Stereo/Mono selection transmitter onlyExit Exiting the operating menuTroubleshooting Error checklistFor the EK 300 IEM G2 receiver Care and maintenanceRecommendations and tips For optimum receptionAdditional information Wireless transmission systemsHDX noise reduction Pilot tone squelch SquelchField strength-dependent squelch System SpecificationsIE 3 in-ear headphones EK 300 IEM G2 stereo receiverAccessories Connector assignmentDeutsch Italiano Sennheiser electronic GmbH & Co. KG Observación BemerkungNota Opmerking

EW 300 IEM G2 specifications

The Sennheiser EW 300 IEM G2 is a professional in-ear monitoring system designed for musicians, sound engineers, and audio professionals seeking high-quality wireless audio performance. One of the standout features of the EW 300 IEM G2 is its robust transmission range, which allows users to enjoy reliable audio performance over distances of up to 330 feet in optimal conditions. This feature is essential for performers who require freedom of movement on stage without compromising audio quality.

The EW 300 IEM G2 employs a true diversity receiver design, which minimizes the risk of dropouts and ensures consistent audio quality. This technology utilizes two antennas that receive the same signal, selecting the stronger one to maintain a stable connection. The system operates on multiple frequency ranges, allowing users to choose the best channel that suits their needs while reducing interference from other wireless devices.

Another notable aspect is the high-quality audio output. The EW 300 IEM G2 supports a frequency response of 25 Hz to 19 kHz, ensuring a natural sound reproduction across the entire audio spectrum. This wide frequency range makes it suitable for various applications, from live performances and studio recordings to theatrical productions.

The EW 300 IEM G2 features a simple and intuitive user interface, allowing for easy setup and operation. Its LCD display provides essential information such as frequency, channel, and battery status, helping users stay informed during performances. The system also includes features like auto-scan, which identifies available frequencies and automatically selects the best one for optimal performance.

Furthermore, the EW 300 IEM G2 is versatile, accommodating various earpieces to suit individual preferences and comfort levels. Whether using custom-molded in-ear monitors or universal earbuds, the system can deliver a tailored listening experience.

Overall, the Sennheiser EW 300 IEM G2 stands out as a reliable and feature-rich in-ear monitoring solution. Its advanced technologies, user-friendly interface, and high-quality audio capabilities make it a preferred choice for professionals in the music and entertainment industry.
Top Page Image Contents