Sennheiser EW 300 IEM G2 manual BNC extension cables using the supplied plain

Page 12

To mount two transmitters into a rack:

Place the two transmitters side by side onto a flat surface, their bottom sides facing upwards.

Align the connecting plate

over the holes in the

bottom sides of the transmitters.

 

Secure the connecting plate

 

using eight of the

supplied recessed head screws (M 3x6).

Hook the two rack mount “ears”

to the front panels

of the transmitters.

 

 

Secure the rack mount “ears” to the transmitters using two of the supplied recessed head screws (M 3x6) respectively.

Slide the transmitters into the 19” rack.

Secure the rack mount “ears” to the rack.

When mounting only one transmitter into a rack, use the connecting bar instead of the second transmitter.

Hook the two rack mount “ears” to the front panels of the transmitter.

Secure the rack mount “ears” to the transmitter using two of the supplied recessed head screws (M 3x6) respectively.

Secure the connecting bar to one of the rack mount “ears” using two of the supplied recessed head screws (M 6x10).

If you are not front mounting the antennas, insert the two covering plugs into the antenna holes of the connecting bar.

Slide the transmitter into the 19” rack.

Secure the rack mount “ears” to the rack.

To mount the transmitter’s antenna connection to the front of the GA 2 rack adapter using the AM 2 antenna mount:

Screw the BNC socket to the connecting bar washer and nut.

of the BNC extension cables using the supplied plain

Connect the BNC connector

to the BNC socket

at

the rear of the transmitter.

 

 

Slide the transmitter into the 19” rack.

Secure the rack mount “ears” to the rack.

Connect the telescopic antenna

to the BNC

socket .

 

Pull the end cap to extend the telescopic antenna.

50

Page 11 Page 13
Image 12
Page 11 Page 13
Contents W300 IEM Thank you for choosing Sennheiser Contents Ew 300 IEM G2 system Channel bank systemSafety instructions System componentsOverview of operating controls SR 300 IEM G2 stereo transmitterEK 300 IEM G2 stereo receiver Indications and displays on the transmitter Indications and displays on the receiverRF signal indication Mute displayPilot display Display backlightingConnecting the antenna Connecting the mains unitConnecting the amplifier/mixing console Preparing the components for useConnecting the headphones/monitoring the audio signal Volume up? noService interface Rack adapter and antenna mountBNC extension cables using the supplied plain Connecting the headphones Inserting and replacing the batteriesInserting and charging the accupack Using the components Switching the components on/offAdjusting the volume Switching the transmitter on/offAdjusting the balance Activating/deactivating the lock modeAttaching the receiver to clothing Operating menu ButtonsOverview of menus Working with the operating menuAdjusting a setting Storing a settingGetting into the operating menu Selecting a menuOperating menu of the stereo transmitter 786.300 MHz 790.250 MHz790.250 MHz 807.900 MHz 786.300 MHz 797.075 MHzIiiiii StereoOff MonoExit Operating menu of the stereo receiverName PLT. on Adjustment tips for the operating menu Switching between channel banksSwitching between the channels in a channel bank Scanning the channel banks for free channels receiver onlyAdjusting the squelch threshold receiver only Multi-channel operationStarting the scan and storing the scan result Releasing locked channelsAdjusting the sensitivity transmitter only Stereo/FOCUS selection receiver onlyIMPORTANT! Notes Selecting the standard display Entering a nameSR 300 IEM G2 stereo transmitter EK 300 IEM stereo receiverLoading the factory-preset default settings Stereo/Mono selection transmitter onlyExit Exiting the operating menuTroubleshooting Error checklistCare and maintenance Recommendations and tipsFor the EK 300 IEM G2 receiver For optimum receptionWireless transmission systems Additional informationHDX noise reduction Squelch Pilot tone squelchField strength-dependent squelch Specifications IE 3 in-ear headphonesSystem EK 300 IEM G2 stereo receiverAccessories Connector assignmentDeutsch Italiano Sennheiser electronic GmbH & Co. KG Bemerkung NotaObservación Opmerking

EW 300 IEM G2 specifications

The Sennheiser EW 300 IEM G2 is a professional in-ear monitoring system designed for musicians, sound engineers, and audio professionals seeking high-quality wireless audio performance. One of the standout features of the EW 300 IEM G2 is its robust transmission range, which allows users to enjoy reliable audio performance over distances of up to 330 feet in optimal conditions. This feature is essential for performers who require freedom of movement on stage without compromising audio quality.

The EW 300 IEM G2 employs a true diversity receiver design, which minimizes the risk of dropouts and ensures consistent audio quality. This technology utilizes two antennas that receive the same signal, selecting the stronger one to maintain a stable connection. The system operates on multiple frequency ranges, allowing users to choose the best channel that suits their needs while reducing interference from other wireless devices.

Another notable aspect is the high-quality audio output. The EW 300 IEM G2 supports a frequency response of 25 Hz to 19 kHz, ensuring a natural sound reproduction across the entire audio spectrum. This wide frequency range makes it suitable for various applications, from live performances and studio recordings to theatrical productions.

The EW 300 IEM G2 features a simple and intuitive user interface, allowing for easy setup and operation. Its LCD display provides essential information such as frequency, channel, and battery status, helping users stay informed during performances. The system also includes features like auto-scan, which identifies available frequencies and automatically selects the best one for optimal performance.

Furthermore, the EW 300 IEM G2 is versatile, accommodating various earpieces to suit individual preferences and comfort levels. Whether using custom-molded in-ear monitors or universal earbuds, the system can deliver a tailored listening experience.

Overall, the Sennheiser EW 300 IEM G2 stands out as a reliable and feature-rich in-ear monitoring solution. Its advanced technologies, user-friendly interface, and high-quality audio capabilities make it a preferred choice for professionals in the music and entertainment industry.
Top Page Image Contents