Using the components
Switching the components on/off
Switching the transmitter on/off
Press the ON button | to switch the transmitter on. |
To switch the transmitter off, press the ON button until “OFF” appears on the display.
Note:
The transmitter can only be switched off when the standard display is shown on the display panel. Within the operating menu, the ON button serves as the ESC (cancel) key, i.e you cancel your entry and return to the standard display.
Switching the receiver on/off |
|
To switch the receiver on, turn the volume control | clockwise until it |
clicks. The red LED lights up. |
|
To switch the receiver off, turn the volume control | counterclockwise |
until it clicks. The red LED goes off. |
|
Note: |
|
y The receiver has a short |
|
yRemove the batteries or the accupack when the receiver will not be used
for extended periods of time.
Adjusting the volume
You can adjust the volume at the headphone output on both the transmitter and the receiver.
Use the volume control | or | to adjust the volume of the connected |
headphones. |
|
|
Volume up? – NO!
When people use headphones, they tend to choose a higher volume than with loudspeakers. Listening at high volume levels for long periods can lead to permanent hearing defects. Please protect your hearing, Sennheiser headphones have an excellent sound quality even at low volumes.
52