Sennheiser EW 300 IEM G2 manual Troubleshooting, Error checklist

Page 30

Troubleshooting

Error checklist

Problem

Possible cause

Possible solution

 

 

 

No operation indication

Batteries are flat or

Replace the batteries or

 

accupack is flat (receiver only)

recharge the accupack

 

 

 

 

No mains connection (transmitter

Check the connections of the mains

 

only)

unit

 

 

 

No RF signal

Transmitter and receiver are not on

Set transmitter and receiver to the

 

the same channel

same channel

 

 

 

 

Transmitter is out of range

Check the squelch threshold setting

 

 

(see “Adjusting the squelch threshold

 

 

(receiver only)” on page 63) or

 

 

reduce the distance between

 

 

transmitter and receiving antenna

 

 

 

RF signal available, no audio

Transmitter is set to mono operation

Deactivate the pilot tone evaluation

signal, “MUTE” display

and the pilot tone evaluation of the

on the receiver

appears on the display panel

receiver is activated

 

 

 

 

 

Receiver’s squelch threshold is

See “Adjusting the squelch threshold

 

adjusted too high

(receiver only)” on page 63)

 

 

 

Audio signal has a high level

Transmitter sensitivity is adjusted

See “Adjusting the sensitivity

of background noise

too low

(transmitter only)” on page 64

 

 

 

Audio signal is distorted

Transmitter sensitivity is adjusted

See “Adjusting the sensitivity

 

too high

(transmitter only)” on page 64

 

 

 

No access to a certain channel

During scanning, an RF signal has

See “Scanning the channel banks for

 

been detected on this channel and

free channels (receiver only)” on

 

the channel has been locked

page 62

 

 

 

If problems occur that are not listed in the above table or if the problems cannot be solved with the proposed solutions, please contact your local Sennheiser agent for assistance.

68

Page 29 Page 31
Image 30
Page 29 Page 31
Contents W300 IEM Thank you for choosing Sennheiser Contents Ew 300 IEM G2 system Channel bank systemSafety instructions System componentsOverview of operating controls SR 300 IEM G2 stereo transmitterEK 300 IEM G2 stereo receiver Indications and displays on the transmitter Indications and displays on the receiverPilot display RF signal indicationMute display Display backlightingConnecting the amplifier/mixing console Connecting the antennaConnecting the mains unit Preparing the components for useService interface Connecting the headphones/monitoring the audio signalVolume up? no Rack adapter and antenna mountBNC extension cables using the supplied plain Connecting the headphones Inserting and replacing the batteriesInserting and charging the accupack Adjusting the volume Using the componentsSwitching the components on/off Switching the transmitter on/offAdjusting the balance Activating/deactivating the lock modeAttaching the receiver to clothing Operating menu ButtonsOverview of menus Working with the operating menuGetting into the operating menu Adjusting a settingStoring a setting Selecting a menu790.250 MHz 807.900 MHz Operating menu of the stereo transmitter786.300 MHz 790.250 MHz 786.300 MHz 797.075 MHzOff IiiiiiStereo MonoExit Operating menu of the stereo receiverName PLT. on Switching between the channels in a channel bank Adjustment tips for the operating menuSwitching between channel banks Scanning the channel banks for free channels receiver onlyStarting the scan and storing the scan result Adjusting the squelch threshold receiver onlyMulti-channel operation Releasing locked channelsAdjusting the sensitivity transmitter only Stereo/FOCUS selection receiver onlyIMPORTANT! Notes SR 300 IEM G2 stereo transmitter Selecting the standard displayEntering a name EK 300 IEM stereo receiverLoading the factory-preset default settings Stereo/Mono selection transmitter onlyExit Exiting the operating menuTroubleshooting Error checklistFor the EK 300 IEM G2 receiver Care and maintenanceRecommendations and tips For optimum receptionWireless transmission systems Additional informationHDX noise reduction Squelch Pilot tone squelchField strength-dependent squelch System SpecificationsIE 3 in-ear headphones EK 300 IEM G2 stereo receiverAccessories Connector assignmentDeutsch Italiano Sennheiser electronic GmbH & Co. KG Observación BemerkungNota Opmerking

EW 300 IEM G2 specifications

The Sennheiser EW 300 IEM G2 is a professional in-ear monitoring system designed for musicians, sound engineers, and audio professionals seeking high-quality wireless audio performance. One of the standout features of the EW 300 IEM G2 is its robust transmission range, which allows users to enjoy reliable audio performance over distances of up to 330 feet in optimal conditions. This feature is essential for performers who require freedom of movement on stage without compromising audio quality.

The EW 300 IEM G2 employs a true diversity receiver design, which minimizes the risk of dropouts and ensures consistent audio quality. This technology utilizes two antennas that receive the same signal, selecting the stronger one to maintain a stable connection. The system operates on multiple frequency ranges, allowing users to choose the best channel that suits their needs while reducing interference from other wireless devices.

Another notable aspect is the high-quality audio output. The EW 300 IEM G2 supports a frequency response of 25 Hz to 19 kHz, ensuring a natural sound reproduction across the entire audio spectrum. This wide frequency range makes it suitable for various applications, from live performances and studio recordings to theatrical productions.

The EW 300 IEM G2 features a simple and intuitive user interface, allowing for easy setup and operation. Its LCD display provides essential information such as frequency, channel, and battery status, helping users stay informed during performances. The system also includes features like auto-scan, which identifies available frequencies and automatically selects the best one for optimal performance.

Furthermore, the EW 300 IEM G2 is versatile, accommodating various earpieces to suit individual preferences and comfort levels. Whether using custom-molded in-ear monitors or universal earbuds, the system can deliver a tailored listening experience.

Overall, the Sennheiser EW 300 IEM G2 stands out as a reliable and feature-rich in-ear monitoring solution. Its advanced technologies, user-friendly interface, and high-quality audio capabilities make it a preferred choice for professionals in the music and entertainment industry.
Top Page Image Contents