Sennheiser EW 300 IEM G2 Connecting the headphones/monitoring the audio signal, Volume up? no

Page 11

Via the “Sensitiv” menu, adjust the transmitter’s input sensitivity (see “Adjusting the sensitivity (transmitter only)” on page 64).

Connecting the headphones/monitoring the audio signal

NeueAbbildung

To monitor the audio signal, connect headphones with a ¼” (6.3 mm) jack plug to the headphone output (PHONES) .

Attention! High volume!

Even short exposure to high volume levels will damage your hearing! Set the volume for the connected headphones to the minimum before putting the headphones on.

First, set the volume control to the lowest volume by turning it to the left as far as possible. Then gradually turn up the volume.

Volume up? – NO!

When people use headphones, they tend to choose a higher volume than with loudspeakers. Listening at high volume levels for long periods can lead to permanent hearing defects. Please protect your hearing, Sennheiser headphones have an excellent sound quality even at low volumes.

Service interface

The service interface

is only required for servicing purposes.

19” rack adapter and antenna mount

For mounting one or two transmitters into a 19” rack, you require the GA 2 rack adapter (available as an accessory). The GA 2 rack adapter consists of:

y 2 rack mount “ears” y 1 connecting bar y 1 connecting plate

y 2 covering plugs for antenna holes

y12 recessed head screws M 3x6

y2 recessed head screws M 6x10

When mounting only one transmitter into a rack, you can use the AM 2 antenna mount (available as an accessory) to mount the transmitter’s antenna connection to the front of the GA 2 rack adapter. The AM 2 antenna mount consists of:

y 2 BNC extension cables (screw-in BNC socket to BNC connector ) y 2 plains washers

y2 nuts

49

Page 10 Page 12
Image 11
Page 10 Page 12
Contents W300 IEM Thank you for choosing Sennheiser Contents Channel bank system Ew 300 IEM G2 systemSystem components Safety instructionsSR 300 IEM G2 stereo transmitter Overview of operating controlsEK 300 IEM G2 stereo receiver Indications and displays on the receiver Indications and displays on the transmitterDisplay backlighting RF signal indicationMute display Pilot displayPreparing the components for use Connecting the antennaConnecting the mains unit Connecting the amplifier/mixing consoleRack adapter and antenna mount Connecting the headphones/monitoring the audio signalVolume up? no Service interfaceBNC extension cables using the supplied plain Inserting and charging the accupack Connecting the headphonesInserting and replacing the batteries Switching the transmitter on/off Using the componentsSwitching the components on/off Adjusting the volumeAttaching the receiver to clothing Adjusting the balanceActivating/deactivating the lock mode Buttons Operating menuWorking with the operating menu Overview of menusSelecting a menu Adjusting a settingStoring a setting Getting into the operating menu786.300 MHz 797.075 MHz Operating menu of the stereo transmitter786.300 MHz 790.250 MHz 790.250 MHz 807.900 MHzMono IiiiiiStereo OffOperating menu of the stereo receiver ExitName PLT. on Scanning the channel banks for free channels receiver only Adjustment tips for the operating menuSwitching between channel banks Switching between the channels in a channel bankReleasing locked channels Adjusting the squelch threshold receiver onlyMulti-channel operation Starting the scan and storing the scan resultIMPORTANT! Notes Adjusting the sensitivity transmitter onlyStereo/FOCUS selection receiver only EK 300 IEM stereo receiver Selecting the standard displayEntering a name SR 300 IEM G2 stereo transmitterStereo/Mono selection transmitter only Loading the factory-preset default settingsExiting the operating menu ExitError checklist TroubleshootingFor optimum reception Care and maintenanceRecommendations and tips For the EK 300 IEM G2 receiverHDX noise reduction Wireless transmission systemsAdditional information Field strength-dependent squelch SquelchPilot tone squelch EK 300 IEM G2 stereo receiver SpecificationsIE 3 in-ear headphones SystemConnector assignment AccessoriesDeutsch Italiano Sennheiser electronic GmbH & Co. KG Opmerking BemerkungNota Observación

EW 300 IEM G2 specifications

The Sennheiser EW 300 IEM G2 is a professional in-ear monitoring system designed for musicians, sound engineers, and audio professionals seeking high-quality wireless audio performance. One of the standout features of the EW 300 IEM G2 is its robust transmission range, which allows users to enjoy reliable audio performance over distances of up to 330 feet in optimal conditions. This feature is essential for performers who require freedom of movement on stage without compromising audio quality.

The EW 300 IEM G2 employs a true diversity receiver design, which minimizes the risk of dropouts and ensures consistent audio quality. This technology utilizes two antennas that receive the same signal, selecting the stronger one to maintain a stable connection. The system operates on multiple frequency ranges, allowing users to choose the best channel that suits their needs while reducing interference from other wireless devices.

Another notable aspect is the high-quality audio output. The EW 300 IEM G2 supports a frequency response of 25 Hz to 19 kHz, ensuring a natural sound reproduction across the entire audio spectrum. This wide frequency range makes it suitable for various applications, from live performances and studio recordings to theatrical productions.

The EW 300 IEM G2 features a simple and intuitive user interface, allowing for easy setup and operation. Its LCD display provides essential information such as frequency, channel, and battery status, helping users stay informed during performances. The system also includes features like auto-scan, which identifies available frequencies and automatically selects the best one for optimal performance.

Furthermore, the EW 300 IEM G2 is versatile, accommodating various earpieces to suit individual preferences and comfort levels. Whether using custom-molded in-ear monitors or universal earbuds, the system can deliver a tailored listening experience.

Overall, the Sennheiser EW 300 IEM G2 stands out as a reliable and feature-rich in-ear monitoring solution. Its advanced technologies, user-friendly interface, and high-quality audio capabilities make it a preferred choice for professionals in the music and entertainment industry.
Top Page Image Contents