Sennheiser EW 300 IEM G2 manual Specifications, System, IE 3 in-ear headphones

Page 34

Specifications

System

RF characteristics Modulation Frequency ranges Transmission/receiving frequencies

Switching bandwidth

Nominal/peak deviation

Frequency stability

AF characteristics Noise reduction system AF frequency response

MPX pilot tone (Frequenz/Hub)

S/N ratio (at 1 mV and peak deviation) THD (at nominal deviation and 1 kHz)

General data Temperature range Dimensions of carrying case [mm] Weight of carrying case

IE 3 in-ear headphones

wideband FM stereo, MPX pilot tone

518–554, 626–662, 740–776, 786–822, 830–866 MHz

8 channel banks with up to 12 factory-preset channels each

1 channel bank with up to 12 freely selectable channels (1440 frequencies, tunable in steps of 25 kHz)

36 MHz

±24 kHz/±48 kHz

≤±15 ppm

Sennheiser HDX

40–15,000 Hz

19 KHz/±4 kHz

≥91 dB(A) ≤ 0.9 %

–10 °C to +55 °C 380 x 370 x 70

approx. 3000 g

Frequency response

40–20,000 Hz

 

Max. SPL

118 dB SPL

 

Impedance

32 Ω

 

EK 300 IEM G2 stereo receiver

 

 

RF characteristics

 

 

Receiver principle

 

 

non diversity

 

Sensitivity (with HDX, peak deviation)

 

< 2.5 µV at 52 dBArms S/N ratio

Adjacent channel rejection

 

 

≥ 70 dB

 

Intermodulation attenuation

 

 

≥ 70 dB

 

Blocking

≥ 80 dB

 

Squelch

 

 

4 steps: OFF

 

 

LO:

5 dBµV

 

MID: 15 dBµV

 

HI:

25 dBµV

Pilot tone squelch (MPX pilot tone)

 

can be switched off

AF characteristics

Headphone output3.5 mm jack socket

AF output voltage (at peak deviation 1 kHzAF) PHONES 2 x ≥ 100 mW at 32 Ω

Overall device

 

Power supply

 

2 AA size batteries, 1.5 V

Nominal voltage

 

2.4 V

Max. power consumption at nominal voltage

approx. 190 mA (2 x 30 mW)

Power consumption with switched-off receiver

 

≤ 250 µA

Operating time (with batteries)

 

6–10 h (depending on volume level)

Operating time (with BA 2015 accupack)

6–10 h (depending on volume level)

Dimensions [mm]

 

82 x 64 x 24

Weight (incl. batteries)

 

approx. 170 g

72

Page 33 Page 35
Image 34
Page 33 Page 35
Contents W300 IEM Thank you for choosing Sennheiser Contents Ew 300 IEM G2 system Channel bank systemSafety instructions System componentsOverview of operating controls SR 300 IEM G2 stereo transmitterEK 300 IEM G2 stereo receiver Indications and displays on the transmitter Indications and displays on the receiverPilot display RF signal indicationMute display Display backlightingConnecting the amplifier/mixing console Connecting the antennaConnecting the mains unit Preparing the components for useService interface Connecting the headphones/monitoring the audio signalVolume up? no Rack adapter and antenna mountBNC extension cables using the supplied plain Inserting and replacing the batteries Connecting the headphonesInserting and charging the accupack Adjusting the volume Using the componentsSwitching the components on/off Switching the transmitter on/offActivating/deactivating the lock mode Adjusting the balanceAttaching the receiver to clothing Operating menu ButtonsOverview of menus Working with the operating menuGetting into the operating menu Adjusting a settingStoring a setting Selecting a menu790.250 MHz 807.900 MHz Operating menu of the stereo transmitter786.300 MHz 790.250 MHz 786.300 MHz 797.075 MHzOff IiiiiiStereo MonoExit Operating menu of the stereo receiverName PLT. on Switching between the channels in a channel bank Adjustment tips for the operating menuSwitching between channel banks Scanning the channel banks for free channels receiver onlyStarting the scan and storing the scan result Adjusting the squelch threshold receiver onlyMulti-channel operation Releasing locked channelsStereo/FOCUS selection receiver only Adjusting the sensitivity transmitter onlyIMPORTANT! Notes SR 300 IEM G2 stereo transmitter Selecting the standard displayEntering a name EK 300 IEM stereo receiverLoading the factory-preset default settings Stereo/Mono selection transmitter onlyExit Exiting the operating menuTroubleshooting Error checklistFor the EK 300 IEM G2 receiver Care and maintenanceRecommendations and tips For optimum receptionAdditional information Wireless transmission systemsHDX noise reduction Pilot tone squelch SquelchField strength-dependent squelch System SpecificationsIE 3 in-ear headphones EK 300 IEM G2 stereo receiverAccessories Connector assignmentDeutsch Italiano Sennheiser electronic GmbH & Co. KG Observación BemerkungNota Opmerking

EW 300 IEM G2 specifications

The Sennheiser EW 300 IEM G2 is a professional in-ear monitoring system designed for musicians, sound engineers, and audio professionals seeking high-quality wireless audio performance. One of the standout features of the EW 300 IEM G2 is its robust transmission range, which allows users to enjoy reliable audio performance over distances of up to 330 feet in optimal conditions. This feature is essential for performers who require freedom of movement on stage without compromising audio quality.

The EW 300 IEM G2 employs a true diversity receiver design, which minimizes the risk of dropouts and ensures consistent audio quality. This technology utilizes two antennas that receive the same signal, selecting the stronger one to maintain a stable connection. The system operates on multiple frequency ranges, allowing users to choose the best channel that suits their needs while reducing interference from other wireless devices.

Another notable aspect is the high-quality audio output. The EW 300 IEM G2 supports a frequency response of 25 Hz to 19 kHz, ensuring a natural sound reproduction across the entire audio spectrum. This wide frequency range makes it suitable for various applications, from live performances and studio recordings to theatrical productions.

The EW 300 IEM G2 features a simple and intuitive user interface, allowing for easy setup and operation. Its LCD display provides essential information such as frequency, channel, and battery status, helping users stay informed during performances. The system also includes features like auto-scan, which identifies available frequencies and automatically selects the best one for optimal performance.

Furthermore, the EW 300 IEM G2 is versatile, accommodating various earpieces to suit individual preferences and comfort levels. Whether using custom-molded in-ear monitors or universal earbuds, the system can deliver a tailored listening experience.

Overall, the Sennheiser EW 300 IEM G2 stands out as a reliable and feature-rich in-ear monitoring solution. Its advanced technologies, user-friendly interface, and high-quality audio capabilities make it a preferred choice for professionals in the music and entertainment industry.
Top Page Image Contents