Sennheiser EW 300 IEM G2 Adjustment tips for the operating menu, Switching between channel banks

Page 24

BANK

Bank

CHAN

Channel

TUNE

Tune

SCAN

Adjustment tips for the operating menu

Switching between channel banks

Via the “Bank” menu, you can switch between the nine channel banks of the ew 300 IEM G2 transmitter and receiver. The channel banks “1” to “8” have up to 12 switchable channels that are factory-preset to a transmission/ receiving frequency (see “The channel bank system” on page 42). The channel bank “U” (user bank) also has up to 12 switchable channels to store your selection out of 1440 transmission/receiving frequencies that are freely selectable within the preset frequency range.

When switching from one channel bank to another, the channel with the lowest channel number is automatically displayed. If, during the last scan of this channel bank, an interfering frequency was detected on the channel with the lowest channel number, the receiver display panel automatically displays the next free channel (see below).

Switching between the channels in a channel bank

Via the “Channel” menu, you can switch between the channels in a channel bank.

Always set the transmitter and the receiver of a transmission link to the same channel. After scanning a channel bank (see “Scanning the channel banks for free channels (receiver only)” on page 62), only the free channels are displayed. Set the transmitter to one of the free channels

Selecting the frequencies to be stored in the channel bank “U”

Via the “Tune” menu, you can select the frequencies to be stored in the channel bank “U” (user bank).

When you have selected one of the channel banks “1” to “8” and then select the “Tune” menu, the transmitter or receiver automatically switches to channel 01 of the channel bank “U”. In this case, “U.01” briefly appears on the display.

Use the / buttons to select the desired transmission or receiving frequency. Transmission and receiving frequencies are tunable in 25-kHz steps within a switching bandwidth of 36 MHz max. For intermodulation- free frequencies, please refer to the enclosed frequency table.

Scanning the channel banks for free channels (receiver only)

Before putting one or several transmission links into operation, you should scan the selected channel bank for free channels.

62

Page 23 Page 25
Image 24
Page 23 Page 25
Contents W300 IEM Thank you for choosing Sennheiser Contents Ew 300 IEM G2 system Channel bank systemSafety instructions System componentsOverview of operating controls SR 300 IEM G2 stereo transmitterEK 300 IEM G2 stereo receiver Indications and displays on the transmitter Indications and displays on the receiverRF signal indication Mute displayPilot display Display backlightingConnecting the antenna Connecting the mains unitConnecting the amplifier/mixing console Preparing the components for useConnecting the headphones/monitoring the audio signal Volume up? noService interface Rack adapter and antenna mountBNC extension cables using the supplied plain Connecting the headphones Inserting and replacing the batteriesInserting and charging the accupack Using the components Switching the components on/offAdjusting the volume Switching the transmitter on/offAdjusting the balance Activating/deactivating the lock modeAttaching the receiver to clothing Operating menu ButtonsOverview of menus Working with the operating menuAdjusting a setting Storing a settingGetting into the operating menu Selecting a menuOperating menu of the stereo transmitter 786.300 MHz 790.250 MHz790.250 MHz 807.900 MHz 786.300 MHz 797.075 MHzIiiiii StereoOff MonoExit Operating menu of the stereo receiverName PLT. on Adjustment tips for the operating menu Switching between channel banksSwitching between the channels in a channel bank Scanning the channel banks for free channels receiver onlyAdjusting the squelch threshold receiver only Multi-channel operationStarting the scan and storing the scan result Releasing locked channelsAdjusting the sensitivity transmitter only Stereo/FOCUS selection receiver onlyIMPORTANT! Notes Selecting the standard display Entering a nameSR 300 IEM G2 stereo transmitter EK 300 IEM stereo receiverLoading the factory-preset default settings Stereo/Mono selection transmitter onlyExit Exiting the operating menuTroubleshooting Error checklistCare and maintenance Recommendations and tipsFor the EK 300 IEM G2 receiver For optimum receptionWireless transmission systems Additional informationHDX noise reduction Squelch Pilot tone squelchField strength-dependent squelch Specifications IE 3 in-ear headphonesSystem EK 300 IEM G2 stereo receiverAccessories Connector assignmentDeutsch Italiano Sennheiser electronic GmbH & Co. KG Bemerkung NotaObservación Opmerking

EW 300 IEM G2 specifications

The Sennheiser EW 300 IEM G2 is a professional in-ear monitoring system designed for musicians, sound engineers, and audio professionals seeking high-quality wireless audio performance. One of the standout features of the EW 300 IEM G2 is its robust transmission range, which allows users to enjoy reliable audio performance over distances of up to 330 feet in optimal conditions. This feature is essential for performers who require freedom of movement on stage without compromising audio quality.

The EW 300 IEM G2 employs a true diversity receiver design, which minimizes the risk of dropouts and ensures consistent audio quality. This technology utilizes two antennas that receive the same signal, selecting the stronger one to maintain a stable connection. The system operates on multiple frequency ranges, allowing users to choose the best channel that suits their needs while reducing interference from other wireless devices.

Another notable aspect is the high-quality audio output. The EW 300 IEM G2 supports a frequency response of 25 Hz to 19 kHz, ensuring a natural sound reproduction across the entire audio spectrum. This wide frequency range makes it suitable for various applications, from live performances and studio recordings to theatrical productions.

The EW 300 IEM G2 features a simple and intuitive user interface, allowing for easy setup and operation. Its LCD display provides essential information such as frequency, channel, and battery status, helping users stay informed during performances. The system also includes features like auto-scan, which identifies available frequencies and automatically selects the best one for optimal performance.

Furthermore, the EW 300 IEM G2 is versatile, accommodating various earpieces to suit individual preferences and comfort levels. Whether using custom-molded in-ear monitors or universal earbuds, the system can deliver a tailored listening experience.

Overall, the Sennheiser EW 300 IEM G2 stands out as a reliable and feature-rich in-ear monitoring solution. Its advanced technologies, user-friendly interface, and high-quality audio capabilities make it a preferred choice for professionals in the music and entertainment industry.
Top Page Image Contents