Multiquip MQ62TDD Attaching Safety Chain, Connecting Trailer Lights, Uncoupling the Ball Hitch

Page 40

TRAILER SAFETY GUIDELINES

Attaching Safety Chain

Figure 29. Safety Chain Arrangement for a Bumper Pull Trailer (Ball Hitch)

■Visually inspect the safety chains and hooks for wear or damage. Replace worn or damaged safety chains and hooks before towing.

■Attach the safety chains so that they:

A.Cross underneath the coupler. See Figure 29.

B.Loop around a frame member of the tow vehicle or holes provided in the hitch system (but, DO NOT attach them to an interchangeable part of the hitch assembly).

C.Have enough slack to permit tight turns, but not be close to the road surface, so if the trailer uncouples, the safety chains can hold the tongue up above the road.

WARNING — Safety Chains Rigging

Improper rigging of the safety chains can result in loss of control of the trailer and tow vehicle, leading to death or serious injury, if the trailer uncouples from the tow vehicle.

∙Fasten chains to frame of tow vehicle. DO NOT fasten chains to any part of the hitch unless the hitch has holes or loops specifically for that purpose.

∙Cross chains underneath hitch and coupler with enough slack to permit turning and to hold tongue up, if the trailer comes loose.

Connecting Trailer Lights

Connect the trailer lights to the tow vehicle’s electrical system using the electric connectors at the front of the trailer (tongue). Reference the wiring diagram shown in the trailer wiring diagram section of this manual. Before towing the trailer check for the following:

■Running lights (turn on tow vehicle headlights).

■Brake Lights (step on tow vehicle brake pedal).

■Backup Lights (place tow vehicle gear shift in reverse).

■Turn Signals (activate tow vehicle directional signal lever).

WARNING — Electrical Connections

Improper electrical connection between the tow vehicle and the trailer will result in inoperable lights and electric brakes, and can lead to collision.

Before each tow:

∙Check that the taillights, brake lights and turn signals work

∙Check that the electric brakes work by operating the brake controller inside the tow vehicle.

Uncoupling the Ball Hitch

Follow these steps to uncouple ball hitch from tow vehicle:

■Block trailer tires to prevent the trailer from rolling,before jacking the trailer up.

■Disconnect the electrical connector.

■Disconnect the breakaway brake switch cable. Promptly replace the pullpin in the switchbox.

■Before extending jackstand, make certain the ground surface below the jackstand foot will support the tongue load.

■Rotate the jackstand handle (or crank) clockwise. This will slowly extend the jack and transfer the weightof the trailer tongue to the jack.

PAGE 40 — MQ62TDD TRASH PUMP • OPERATION AND PARTS MANUAL — REV. #0 (07/30/09)

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Model MQ62TDD Proposition 65 Warning Reporting Safety Defects Reporting Safety DefectsTable of Contents MQ62TDD Trash PumpParts Ordering Procedures Ordering parts has never been easierTraining Checklist Training ChecklistRead Operator’s Manual completely Daily PRE-OPERATION Checklist Daily PRE-OPERATION ChecklistSafety For Your Safety and Safety of OthersSafety General Safety Rules and RegulationsWinter drain water from pump housing to prevent freezing Transporting Specifications Pump SpecificationsDimensions PUMP/TRAILER Dimensions Trailer MountDimensionsskid Mount Dimensions Skid MountGeneral Information Applications Terms to KnowPump Components Pump ComponentsTow Hitch Coupler Requires a 2-inch ball hitch Engine Components Deutz Engine Basic ComponentsIgnition Switch Used to start and stop the engine Control BOX ComponentsBattery Battery Cable InstallationInspection Engine OilFuel FuelSetup Before StartingEngine Startup STARTUP/OPERATIONOperation SHUTDOWN/STORAGE Engine SHUT-DOWNPump Inspection After USE Pump StoragePump Vacuum Test Maintenance PumpTo perform the pump vacuum test do the following General Inspection Air Cleaner Maintenance EngineAir Cleaner with Dust Indicator Check Oil Level Changing Engine OilChanging Oil Filter Changing Fuel FilterBattery Maintenance Battery Electrolyte LevelMaintenance Trailer Adjustable ChannelWheel Hub Adjustment Wheel Bearings HubsLeaf Suspension Suspension Torque RequirementsTrailer Safety Guidelines Trailer Safety InformationCommon Causes for Loss of Trailer TrailerTowing GuidelinesDriving Conditions Coupling to the Tow VehicleInoperable Brakes, Lights or Mirrors Reporting Safety DefectsTrailer Towing Tips Trailer VIN Tag Vehicle VIN TagElectrical Connector Safety ChainsTrailer Lighting and Braking Connector Tow VehicleCoupler Types Ball Hitch CouplerBall Hitch Coupler Pintle Eye Coupler Latching mechanismLower the trailer until the coupler fully Coupling theTrailer to theTowVehicle Ball CouplerConnecting Trailer Lights Attaching Safety ChainUncoupling the Ball Hitch Tire Safety Tire SafetyUnsafe Tires, Lug Nuts or Wheels Tighten lug nuts before each towStep Determining Load Limit of TrailerDetermining Load Limit of Tow Vehicle Step Tire Fundamentals P indicates the tire is for passenger vehiclesTire Safety Tips Reference for additional tire information for light trucksTire Repair Replacing Worn or Damaged TiresWheel Rims Wheels, Bearings and Lug NutsLug Nut Torque Requirements Trailer Lights Wiring Diagram Lights and SignalsTroubleshooting Pump Pump TroubleshootingTroubleshooting Engine Engine TroubleshootingSympton Possible Problem Solution Page Wiring Diagram OLD Style Wiring Diagram NEW Style Sample Parts List Explanation of Code in Remarks ColumnSuggested Spare Parts To 3 unitsNameplate and Decals 7005000 BH21008NPA-320J 49002Trash Pump Assy 2601000010 2620000024000246070000900002 1603000090Trash Pump Assy 0105090815 04512900800105091225 0451250120Trailer Trlrmpxf Assy 0205 SCREW, HHC 3/8 16 x 4001 951410019 NUT, Nyloc 10133 NUT, Nyloc 3/8 29228 29242Trailer TRLR50XF Assy 6109210 BOLT, 1/2 13 x 1-1/2 86109180 10019 NUT, Nyloc 10133 NUT, Nyloc 3/8 190436109160 NUT Skid Assy 19091 Axle Assy 29381U 29381S SPRING, 4 Leaf 29381B46749 29755Lifting Bail ASSY. Trlrmpxf 0105051640 16 X 40 Bolt 2103200 190923019091 Lifting Bail ASSY. TRLR50XF 50XF9102 0105051640 16 X 40 Bolt 020316130Lifting Bail ASSY. Skid 6109210 13 x 1-1/2 Bolt 6109810 Fuel ASSY. Trlrmpxf 6109210 13 x 1-1/2 Bolt 6109208 528484454 6109152Fuel ASSY. TRLR50XF 3122302E-41FGC Fuel ASSY. Skid Part Name Battery ASSY. Trlrmpxf 34596 345970165306531 34506Battery ASSY. TRLR50XF 6109108 Battery ASSY. Skid BOLT, Battery Hold Down Engine Mounting ASSY. Trlrmpxf 016212070 Bolt 34400 6109210 BOLT, HEX Head 1/2-13X1-1/2 XXX001XXX002 13211Engine Mounting ASSY. TRLR50XF Engine Mounting ASSY. TRLR50XF Engine Mounting ASSY. Skid 2101030 10 x 30 HEX Bolt 030216400 63541020310080 60TDD008Engine Assy F2L20116728 OIL Pressure Switch Assy 01118971 118248401118718 Temperature Transmitter Assy 01182377 01143531Starter Assy 01182384 0118139001340070 01319265Control BOX ASSY. OLD Style 01180384 0118038201180383 01182528Control BOX ASSY. NEW Style 34708 EM9820634709 34707AIR Filter Assy 01179428 0427229901112824 02169927Narrow V-BELT Assy 01179565 Lubricated OIL Filter Assy 01174416 Fuel Filter Assy 04270708 Terms and Conditions of Sale Parts Freight PolicyPage HERE’S HOW to GET Help

MQ62TDD specifications

The Multiquip MQ62TDD is a robust engine-driven compressor designed to deliver exceptional performance and reliability in challenging job site conditions. This portable unit is engineered for a wide range of applications, including construction, HVAC, and industrial use. With its powerful engine and user-friendly features, the MQ62TDD stands out as an ideal choice for contractors needing dependable air supply on the go.

One of the primary features of the MQ62TDD is its impressive air output. The unit boasts a maximum air flow rate of up to 62 CFM, allowing it to power multiple pneumatic tools simultaneously. Whether you are operating jackhammers, nail guns, or air impact wrenches, the MQ62TDD ensures consistent and sufficient air pressure to keep your projects moving efficiently.

The MQ62TDD is equipped with a 9-horsepower Honda engine, providing the necessary power to drive the compressor. Honda engines are renowned for their durability and fuel efficiency, and this model is no exception. With an extended run time due to its large fuel tank, the MQ62TDD minimizes downtime, which can be crucial in time-sensitive projects.

In terms of technological advancements, the MQ62TDD features an advanced cooling system designed to keep the compressor operating at optimal temperatures, thus extending the lifespan of the unit. The unit’s lightweight design, combined with a sturdy frame, makes transportation on site straightforward. The integrated handle and collapsible wheels facilitate easy maneuverability, ensuring that the compressor can be relocated without hassle.

Safety is also a priority with the Multiquip MQ62TDD. The unit is designed with protective features such as a low oil shutdown mechanism, which helps to prevent engine damage by automatically turning off if the oil level gets too low. Additionally, the compressor features sound-dampening technology that significantly reduces noise levels, making it ideal for use in noise-sensitive environments.

Overall, the Multiquip MQ62TDD compressor is a versatile, durable, and user-friendly tool that meets the demands of professional contractors. With its high air output, reliable power source, advanced technologies, and safety features, it provides the efficiency and performance needed to tackle any job with confidence.
Top Page Image Contents