Applications, Terms to Know | Multiquip MQ62TDD specification

APPLICATIONS

Figure 3 below shows a typical application using the trash pump.Please note that this pump is intended for the removal of clean water and water containing some debris and solids. Maximum size of solids should not exceed 2 inches (51

mm)in diameter. DO NOT set strainer on bottom of water bed. Placing the strainer above the water bed will prevent the pump from drawing in excessive amounts of sand and foreign debris.

TERMS TO KNOW

The following terms are usually used when referring to lift or head:

1.Static Suction Lift – The vertical distance from the water line to the center of the impeller.

2.Static Discharge Head – The vertical distance from the discharge outlet to the point of discharge or liquid level when discharging into the bottom of a water tank.

3.Dynamic Suction Head – The static suction lift plus the friction in the suction line. Also referred to as total suction head.

4.Dynamic Discharge Head –The static discharge head plus the friction in the discharge line. Also referred to as total discharge head.

5.Total Dynamic Head – The Dynamic Head Suction Head plus the Dynamic Discharge Head. Also referred to as total head.

TRASH

PUMP

	STATIC
DISCHARGE	DISCHARGE
DISCHARGE	HEAD
HOSE

STATIC

SUCTION

LIFT

LOWEST	SUCTION	CHOCKED
WATER		BLOCKS
	HOSE
LEVEL		(PREVENT ROLLING)

BOTTOM

SURFACE

STRAINER

DO NOT LAY

STRAINER ON

BOTTOM SURFACE

Figure 3. Pump Application

MQ62TDD TRASH PUMP • OPERATION AND PARTS MANUAL — REV. #0 (07/30/09) — PAGE 17

MQ62TDD specifications

The Multiquip MQ62TDD is a robust engine-driven compressor designed to deliver exceptional performance and reliability in challenging job site conditions. This portable unit is engineered for a wide range of applications, including construction, HVAC, and industrial use. With its powerful engine and user-friendly features, the MQ62TDD stands out as an ideal choice for contractors needing dependable air supply on the go.

One of the primary features of the MQ62TDD is its impressive air output. The unit boasts a maximum air flow rate of up to 62 CFM, allowing it to power multiple pneumatic tools simultaneously. Whether you are operating jackhammers, nail guns, or air impact wrenches, the MQ62TDD ensures consistent and sufficient air pressure to keep your projects moving efficiently.

The MQ62TDD is equipped with a 9-horsepower Honda engine, providing the necessary power to drive the compressor. Honda engines are renowned for their durability and fuel efficiency, and this model is no exception. With an extended run time due to its large fuel tank, the MQ62TDD minimizes downtime, which can be crucial in time-sensitive projects.

In terms of technological advancements, the MQ62TDD features an advanced cooling system designed to keep the compressor operating at optimal temperatures, thus extending the lifespan of the unit. The unit’s lightweight design, combined with a sturdy frame, makes transportation on site straightforward. The integrated handle and collapsible wheels facilitate easy maneuverability, ensuring that the compressor can be relocated without hassle.

Safety is also a priority with the Multiquip MQ62TDD. The unit is designed with protective features such as a low oil shutdown mechanism, which helps to prevent engine damage by automatically turning off if the oil level gets too low. Additionally, the compressor features sound-dampening technology that significantly reduces noise levels, making it ideal for use in noise-sensitive environments.

Overall, the Multiquip MQ62TDD compressor is a versatile, durable, and user-friendly tool that meets the demands of professional contractors. With its high air output, reliable power source, advanced technologies, and safety features, it provides the efficiency and performance needed to tackle any job with confidence.