QP- 40TE — INITIAL START-UP (ENGINE)
CAUTION
DO NOT attempt to operate the pump until the Safety, General Information and Inspection sections of this manual have
been read and | thoroughly |
understood. |
|
This section is intended to assist the operator with the initial
Starting the Engine
1.Place the engine fuel valve lever (Figure 7) to the "ON" position.
Figure 7. Engine Fuel Valve Lever (ON Position)
2.Move the throttle lever (Figure 8) away from the slow position, about 1/3 of the way toward the fast position.
3.Place the choke lever (Figure 9) in the "OPEN " position if starting a cold engine.
Figure 9. Engine Choke Lever (Open)
4.Placethe chokelever(Figure10)inthe"CLOSED"position if starting a warm engine or the temperature is warm.
Figure 10. Engine Choke Lever (Closed)
5.Place the engine ON/OFF switch (Figure 11) in the "ON " position.
Figure 8. Throttle Lever (1/3 Start Position)
Figure 11. Engine ON/OFF Switch (ON Position)
PAGE 18 — QP- 40TE