840161402 ENnv03.qxd 11/30/07 9:50 AM Page 7
Probe Mode Before First Use: Wash glass lid and crock in hot, soapy water. Rinse and dry. | |
w WARNING | To reduce the risk of electrical shock, do not immerse base in water. |
1
Make sure probe is in center of food and not touching bottom of crock.
2 |
Insert probe into jack on side of slow cooker.
3
Press ON.
4 |
Press PROBE. Heat setting will be illuminated.
5 |
Press arrows to select desired heat setting. Select HIGH or LOW. NOTE: Do not use Warm setting to cook food.
6 |
Press ENTER. Desired Temp will illuminate.
NOTE: To change temperature display from ºF to ºC:
Press PROBE then ENTER at the same time.
The temperature in ºC will now be displayed.
If slow cooker is unplugged, it will reset to ºF.
7 |
Press arrows to select desired temperature.
7