Alpine PXI-H990 owner manual Equalizer adjustment when DVI-9990/TMI- M990 is connected, 99-EN

A. PROC.

ENTER/

Joystick

/

MENU

SETUP

RETURN

Equalizer adjustment (when DVI-9990/TMI- M990 is connected)

When using the (DVI-9990) head unit and the (TMI-M990) monitor (both sold separately) in the system (page 32), EQ adjustments are reflected in the data on the head unit’s and monitor’s displays.

The operation is from the remote control supplied with the head unit. Switch the selector switch on the rear side of the remote control to H/U.

1 Check that the head unit defeat mode is OFF.

2 Press and hold A. PROC. for more than 3 seconds.

3 Select “EQ SETUP” with the Joystick , and press ENTER.

4 Select “Graphic E.Q” or “Parametric E.Q” with the Joystick , and press

ENTER.

Only Graphic Equalizer or Parametric Equalizer can be valid.

5 Select “SETUP” with the Joystick , and press ENTER.

See page 100 for “GRAPHIC EQ adjustment”.

See page 102 for “PARAMETRIC EQ adjustment”.

99-EN