Using the multi-channel function
Supplementary information
The following pages include supplementary information for pages 52 to 87. Please refer to these pages.
TITLE | Description | Related page | |
Speaker setup | The operations performed with the remote control unit in |
| |
(Dolby SP) | step 1 can also be performed by pressing and holding | Page 53 | |
| MENU (SETUP) for at least 3 seconds, moving the joystick | ||
| up or down to select “AP SETUP”, then pressing the joystick. |
| |
| Some of the speaker settings are related to the settings of |
| |
| the other speakers in the system. Therefore, changing the | Page 53 | |
| settings for one speaker may produce a change in the | ||
|
| ||
| output of the other speakers. |
| |
|
|
| |
| If the center speaker is turned “OFF”, the center channel’s |
| |
| audio signals are added to the audio signals output from the | Page 53 | |
| front speakers. However, for discs that | ||
|
| ||
| is not permitted, the center audio signal cannot be added to. |
| |
|
|
| |
| Set the speaker selector to OFF for channels set to OFF in | Page 53 | |
| the Dolby speaker setup. (See page 7.) | ||
|
| ||
|
|
| |
| When using the PRO LOGIC II, Neo:6, if the front speaker |
| |
| is set to “LARGE”, then there will be no output from the | Page 53 | |
| subwoofer. | ||
|
| ||
| Perform the setup for all speakers (“Front”, “Rear”, “Center”, |
| |
| “Rear C” and “Sub. WF”). If not, the sound may not be | Page 53 | |
| balanced. |
| |
| Once the settings are made, we recommend storing them in | Page 53 | |
| the memory. See page 93 for instructions. | ||
|
| ||
Adjusting the | The operations performed with the remote control unit in |
| |
speaker levels | step 1 can also be performed by pressing and holding | Page 57 | |
(OUTPUT LEVEL) | MENU (SETUP) for at least 3 seconds, moving the joystick | ||
| |||
| up or down to select “AP SETUP”, then pressing the joystick. |
| |
|
|
| |
| Adjust based on the front speakers. | Page 57 | |
| If a speaker is set to the off mode, that speaker’s level |
| |
| cannot be adjusted. | Page 57 | |
| Refer to “Speaker setup” (page 53). |
| |
| Once the settings are made, we recommend storing them in | Page 57 | |
| the memory. See page 93 for instructions. | ||
|
| ||
Adjusting the | The operations performed with the remote control unit in |
| |
acoustic image (BI | step 1 can also be performed by pressing and holding | Page 60 | |
PHANTOM) | MENU (SETUP) for at least 3 seconds, moving the joystick | ||
| |||
| up or down to select “AP SETUP”, then pressing the joystick. |
| |
| This adjustment is ineffective if the center speaker is set to | Page 60 | |
| “OFF” in the speaker setup settings. | ||
|
| ||
| Once the settings are made, we recommend storing them in | Page 60 | |
| the memory. See page 93 for instructions. | ||
|
| ||
|
|
|