8 Press 1 () or 5 (), select “LEVEL [Level]”, then press 2 (ENT).
9 Press 2 (ENT), press 1 () or 5 ( ), adjust the output level, then press 6 (RTN).
Each speaker can be adjusted by ±10 dB (±1 dB step).
LEVEL
LEVEL 0 dB
10To adjust another speaker, repeat steps 6 to
9.
11When the settings are completed, press 1() or 5 (), select “End” and press 2 (ENT). The test tone output is cleared.
If “End” is not selected, the test tone is not cleared, and the SETUP cannot be exited.
12Once the settings are completed, press and hold F • SETUP for at least 3 seconds.
•Press 6 (RTN) or RETURN on the remote control in the setting mode to return to the previous item.
Supplement See page 88 for supplementary information.