Convenient Functions
Equalizer adjustment (when DVI-9990/TMI-M990 is connected) (continued)
GRAPHIC EQ adjustment
6 Use Joystick 
to select “L/R” or “L+R”, and press ENTER.
L/R: Independent adjustment values can be set to the Left and Right channels.
L+R: The same adjustment values are set to the Left and Right channels.
When “L+R” have been selected, use Joystick 
to select L or R, and press ENTER.
L:Validates the current setting of the Left channel, setting the same adjustment value to the Left and Right channels.
R:Validates the current setting of the Right channel, setting the same adjustment value to the Left and Right channels.
G R A P H I C E Q
L / R L + R select L / R
FRONT L
FRONT R
REAR L
REAR R
FRONT C
7 Use Joystick 
to select the desired channel, and press ENTER.
The selectable channels will differ depending on the system settings (Page 9).
G R A P H I C E Q
L / R L + R
select L / R
FRONT L
FRONT R
REAR L
REAR R
FRONT C
8 Use Joystick 
to select the frequency,
then press 
or 
and adjust the level.
Adjustable Frequencies Front/Rear/Center: 20 Hz to 20 kHz (1/3 octave intervals)
Sub Woofer: 20 Hz to 160 Hz (1/3 octave intervals)
Level
±9 dB in 0.5 dB steps
G R A P H I C E Q
L/R | FRONT R 31.5Hz | 2.5 dB |