Alpine owner manual Basic Operation, Operating the PXI-H990

Basic Operation

Operating the PXI-H990

The PXI-H990 is operated from the head unit with which it is used.

These operating instructions describe operation with the head unit; both from the unit itself and from the remote control unit.

•The operation for the PXI-H990 is performed from the head unit setup operation. See the reference page in the following chart for the head unit setting/adjustment operation method. The following is displayed on the head unit display.

M.M.Manager

	CROSSOVER	Page 42	Crossover adjustment/Switching the phase
		Page 21	Performing time correction automatically
			(Automated Time Correction)
MOBILE.S.MGR	TCR
		Page 26	Performing time correction manually
			(Time Correction)
	EQ	Page 32	Equalizer adjustments
	Road EQ	Page 15	Using the Road Equalizer function
MEDIA.S.MGR	MX	Page 47	MX settings
	DVD LEVEL	Page 74	Adjusting the DVD level
	BI PHANTOM	Page 60	Adjusting the acoustic image
			Mixing the Bass Sound of the Center
AP SETUP	C.BASS SPLIT	Page 63	Channel with the Sound of the Front Left
			and Right Channels
	REAR MIX	Page 66	Mixing bass sound to the rear channel
MULTI.CH.MGR	LISTEN MODE	Page 72	Achieving powerful high volume sound
	OUTPUT LEVEL	Page 57	Adjusting the speaker levels
	REAR FILL	Page 69	Outputting the Front Channel Signals
			from the Rear Channels
	6.1CH MODE	Page 77	6.1-Channel Settings
	PCM OUT MODE	Page 80	PCM Output Settings
SP SETUP	SP SELECT	Page 7	Setting the speakers
	Dolby SP	Page 53	Speaker setup
PRESET		Page 93	Storing settings in the memory
		Page 96	Calling out stored values
AUX SETUP		Page 91	External input settings

•If operating with the head unit’s buttons, view the head unit’s display. If operating from the remote control supplied with the head unit, view the monitor’s display (sold separately) used in the system. If a monitor is not used in your system, operate from the head unit only.

•For how to connect, refer to the guide for installation and connections.

5-EN