3 Press 1 (
) or 5 (
), select “AP SETUP”, then press 2 (ENT).
4 Press 1 (
) or 5 ( ), select “MULTI.CH.MGR [Multi Channel Manager]”, then press
2 (ENT).
5 Press 1 (
) or 5 ( ), select “BI PHANTOM [Bi Phantom]”, then press 2 (ENT).
6 Press 1 (
) or 5 ( ), select “MODE ON/OFF [Bi Phantom ON/OFF]”.
7 When OFF, press 1 (
) after pressing 2 (ENT) to switch ON.
To switch from ON to OFF, press 5 ( ) after pressing 2 (ENT).
When set to “ON”, the center channel informa- tion is distributed to the left and right speak- ers. This creates an acoustic image simulating a center speaker directly in front of each listener.
8 Press 1 (
) or 5 ( ), select “LEVEL [Level]”, then press 2 (ENT).
Continued
BI PHANTOM
Bi Phantom OFF
Level 0dB