Automatic Adjustments
Performing time correction automatically (Automated Time Correction) (continued)
The automatic adjustment procedure consists of the operations described below and requires about a few minutes to be completed.
Perform the time correction.
When the automatic adjustment is com- pleted, a system reset will be performed.
Strong sounds are produced during the automatic adjustment procedure (except for TW, Sub WF). These sounds can be heard outside the vehicle. Be sure to park the vehicle in a place where the sound will not be a nuisance.
• “NO MIC ERR” is displayed when a microphone has |
| • “NO MIC ERR” is |
not been connected. Press 2 (ENT) to clear the |
| displayed when a |
display. |
| microphone has not been |
|
| connected. Press ENTER |
|
| to clear the display. |
|
|
|
11When the system reset is completed, return to |
|
|
the car and check that the setting value of the |
|
|
Automated Time Correction is reflected. |
|
|
If the setting value is not changed, the |
|
|
microphone may not receive sound, the |
|
|
speaker may be damaged, the connection |
|
|
and wiring may be a malfunction. |
|
|
To store the settings, refer to “Storing settings |
|
|
in the memory” (page 93). |
|
|
• Press 6 (RTN) or RETURN on the remote control in |
|
|
the setting mode to return to the previous item. |
|
|
Supplement See page 25 for supplementary information.