Alpine PXI-H990 owner manual 51-EN

Supplementary information

This page includes supplementary information for pages 26 to 50.

Please refer to these pages.

TITLE	Description	Related page
Performing time	Time correction cannot be performed for speakers set to	Page 26
correction manually	“OFF” at the speaker settings (page 7).
(Time Correction)
	In reality the time difference depends not only on the
	difference in physical distance but also on the delay time
	between the time at which the signals are input to the
	speakers until the sound is output. This delay time depends	Page 26
	on the speaker, and may also be somewhat affected on how
	the speaker is mounted on the vehicle. After making the
	setting, we recommend listening to the sound and fine-
	adjusting if necessary.
	After making the settings, we recommend storing them in	Page 26
	the memory. See page 93 for instructions.
	The operations performed with the remote control unit in
	step 5 can also be performed by pressing and holding	Page 28
	MENU (SETUP) for at least 3 seconds, moving the joystick
	up or down to select “AP SETUP”, then pressing the joystick.
Equalizer adjust-	The equalizer adjustments cannot be made for speakers set	Page 32
ments	to “OFF” at the speaker settings (page 7).
	After making the settings, we recommend storing them in	Page 32
	the memory. See page 93 for instructions.
	The operations performed with the remote control unit in
	step 2 can also be performed by pressing and holding	Page 33
	MENU (SETUP) for at least 3 seconds, moving the joystick
	up or down to select “AP SETUP”, then pressing the joystick.
	When playing back 96kHz or 192kHz DVD-Audio using the
	graphic EQ, the audio signal is automatically down sampled	Page 34
	to 48kHz and played back.
Crossover	The crossover network adjustments cannot be made for	Page 42
adjustment/	speakers set to “OFF” at the speaker settings (page 7).
Switching the phase
	The operations performed with the remote control unit in
	step 1 can also be performed by pressing and holding	Page 42
	MENU (SETUP) for at least 3 seconds, moving the joystick
	up or down to select “AP SETUP”, then pressing the joystick.
	After making the settings, we recommend storing them in	Page 42
	the memory. See page 93 for instructions.
MX settings	The DVD Audio MX setting remains at “OFF”.	Page 47
	The operations performed with the remote control unit in
	step 2 can also be performed by pressing and holding	Page 47
	MENU (SETUP) for at least 3 seconds, moving the joystick
	up or down to select “AP SETUP”, then pressing the joystick.
	After making the settings, we recommend storing them in	Page 47
	the memory. See page 93 for instructions.
	When playing back 96kHz or 192kHz DVD-Audio with MX is
	ON, the audio signal is automatically down sampled to	Page 48
	48kHz and played back.

51-EN