Using the multi-channel function
Speaker setup (Dolby SP) (continued)
10To adjust another speaker, repeat steps 6 to
9.
Cut-off frequency setting
Set the
1) On the mode Dolby SP, press 1 () or
5 ( ), select “CUTOFF [Cutoff]”, then press 2 (ENT).
2) Press 2 (ENT), press 1 () or 5 (), select the cutoff frequency, then press 6 (RTN).
Settable frequencies 80Hz/100Hz/120Hz/160Hz/200Hz
11Once the settings are completed, press and hold F • SETUP for at least 3 seconds.
•Press 6 (RTN) or RETURN on the remote control in the setting mode to return to the previous item.
Supplement See page 88 for supplementary information.