OPERATING YOUR COFFEE MAKER
-Place your coffee maker on a flat, level surface, such as a countertop. Plug the unit into an outlet.
-Open the water container lid. Pour in the desired amount of water. Please observe that you can pour more water in the coffee maker than in the jug. The water level is indicated on the water container.
-NOTE: Make sure that water is NOT exceeding the
-Insert a 1x4 cone shaped paper filter into the filter basket. Place the desired amount of ground coffee into the paper filter.
-Place the jug under the
-Use the brewing button to start brewing - the indicator light will turn on. This indicates that the coffee maker has started brewing.
-Once brewing has finished, the machine automatically turns off both brewing and hotplate. However, the light will remain on until the brewing button (3) is switched off.
-If you wish to brew more coffee immediately after the first brewing has stopped let the appliance cool off for
-When you have finished brewing coffee remove the plug from the mains outlet.
USING THE JUG
To close the lid, turn it clockwise as far as possible (the pin on the lid should be pointing towards the handle).
To pour from the pot when the lid is on, turn the lid half a turn
To take the lid off, turn it
DRIP STOP
Your coffee maker has been designed with an drip stop feature. If you wish at any time during the brewing cycle, you may temporarily remove the jug from the unit and pour a hot cup of coffee. The brewing cycle will be interrupted and no coffee will drip from the filter basket. Simply by replacing the jug on the plate the brewing process will be restarted.
Do not remove the jug for longer than 30 seconds.
CLEANING
-Make sure the coffee maker is switched off and cooled off before each cleaning.
-The jug and basket may be washed in hot soapy water.
-Wipe the coffee maker base with a soft, slightly damp cloth. Never use abrasive scouring pads or cleaners as they will scratch and/or discolour the finish.
15