Rotel RQ-970BX owner manual Risk of Electric Shock Do not Open

Page 2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

APPLICABLE FOR USA, CANADA OR WHERE APPROVED FOR THE USAGE

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT. INSERT FULLY.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND.

This symbol is to alert the user to the presence of uninsulated dangerous voltages inside the product's enclosure that may constitute a risk of electric shock.

This symbol is to alert the user to important operating and maintenance (service) instructions in this manual and literature accompanying the product.

WARNING:

There are no user serviceable parts inside. Refer all servicing to qualified service personnel.

WARNING:

To reduce the risk of fire or electrical shock, do not expose the unit to moisture or water. Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. Take the unit to a qualified service person for in- spection and necessary repairs.

Read all the instructions before connecting or operating the unit. Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the product itself. Follow all operating instructions.

Clean the unit only with a dry cloth or a vacuum cleaner.

Keep the ventilation inlets on the unit unobstructed. For example, do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation slots. If the unit is placed in a bookcase or cabinet, there must be sufficient clearance around the unit and ventilation of the cabinet to allow proper cooling.

Keep the unit away from radiators, heat registers, stoves, or any other appliance that produces heat.

The unit must be connected to a power supply only of the type and voltage specified on the rear panel of the unit.

Connect the unit to the power outlet only with the supplied 2-pin polarized power supply cable or an exact equivalent. Do not modify the supplied cable in any way. Do not attempt to defeat grounding and/or polarization provisions. The cable should be connected to a 2-pin polarized wall outlet, matching the wide blade of the plug to the wide slot of the receptacle. Do not use extension cords.

Do not route the power cord where it will be crushed, pinched, bent at severe angles, exposed to heat, or damaged in any way. Pay particular attention to the power cord at the plug and where it exits the back of the unit.

The power cord should be unplugged from the wall outlet if the unit is to be left unused for a long period of time.

Immediately stop using the unit and have it inspected and/or serviced by a qualified service agency if:

•The power supply cord or plug has been damaged.

•Objects have fallen, or liquid has been spilled, into the unit.

•The unit has been exposed to rain.

•The unit shows signs of improper operation

•The unit has been dropped or damaged in any way

Place the unit on a fixed, level surface strong enough to support its weight. Do not place the unit on a moveable cart that could tip over.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents RQ-970BX Risk of Electric Shock Do not Open Phono Equalizer RQ-970BX Phono RQ-970BXGetting Started EnglishAbout Rotel AC Power and Control Input ConnectionPower Indicator Is Not Lit TroubleshootingSpecifications Output ConnectionsTable des matières Préliminaire FrançaisUn mot sur Rotel Alimentation et commutateur général Prises d’entréeFiche technique Branchement des prises de sortieDépannage Absence de sonInhaltsverzeichnis Zu dieser Anleitung DeutschDie Firma Rotel Netzspannung und Bedienung EingangsanschlußTechnische Daten AusgangsanschlüsseBei Störungen Die Betriebsanzeige leuchtet nichtIndice Per cominciare ItalianoAlcune parole sulla Rotel Collegamento alla rete e controlli Collegamento per il segnale in ingressoCaratteristiche Collegamenti in uscitaRicerca dei guasti La spia di accensione non si illuminaAlimentación y Control Conexiones de Salida 6 Problemas y Posibles SolucionesAcerca de Rotel Para Empezar Conexiones de EntradaPara Empezar EspañolAcerca de Rotel Conmutador de Selección de la Entrada de Fono MM/MC Entrada de Corriente EléctricaConmutador 2 e Indicador Luminoso de Puesta en Marcha Vea la Figura 2 para la realización de las conexionesCaracterísticas Técnicas Problemas y Posibles SolucionesConexiones de Salida El Indicador Luminoso del Panel Frontal no se activaHet aansluiten op het lichtnet InhoudWij van Rotel Aan de slag met de RQ-970BX Het aansluiten van de ingangenAan de slag met de RQ-970BX NederlandsWij van Rotel Het aansluiten van de uitgangen Het aansluiten op het lichtnetHet aansluiten van de ingangen Technische gegevens Wat te doen bij problemen?De lichtnet-indicator werkt niet Geen geluidInnhold Oppstart NorskOm Rotel Utgangsforbindelser Strøm og kontrollInngangsforbindelser Frontpanelets av/på-indikator lyser ikke FeilsøkingSpesifikasjoner Ingen lydRQ-970BX USA

RQ-970BX specifications

The Rotel RQ-970BX is a versatile and high-performance phono preamplifier, designed to appeal to both audiophiles and casual listeners alike. This unit is part of Rotel's long-standing tradition of producing finely crafted audio equipment that prioritizes sound quality and reliability. The RQ-970BX stands out due to its sophisticated features, innovative technologies, and robust design.

One of the key features of the RQ-970BX is its compatibility with both moving magnet (MM) and moving coil (MC) cartridges. This versatility allows users to connect a wide range of turntables and enjoy their vinyl collections without any hassle. The RQ-970BX includes a selection of gain settings, enabling the user to optimize the performance based on the type of cartridge being used. This ensures that the audio signal is accurately amplified, resulting in a clean and dynamic soundstage.

The RQ-970BX incorporates advanced circuit design techniques to minimize distortion and noise. One of these technologies includes the use of high-quality components such as precision resistors and capacitors. This attention to detail ensures that the signal path remains faithful to the original recording. Furthermore, the unit features a toroidal transformer, which provides a stable power supply that enhances overall sound performance.

Another standout characteristic of the RQ-970BX is its solid construction. The robust chassis is designed to minimize resonance and interference, further contributing to the clarity and depth of the audio output. The front panel features easy-to-read LED indicators that provide real-time feedback on the status of the preamplifier, making it user-friendly and accessible.

The RQ-970BX also excels in connectivity options. It offers both RCA outputs for direct connections to amplifiers and receivers, as well as a set of additional outputs to accommodate various audio setups. This flexibility makes it an ideal choice for those looking to integrate a quality phono stage into their existing home audio system.

Overall, the Rotel RQ-970BX is a remarkable phono preamplifier that combines cutting-edge technology, thoughtful design, and impressive audio performance. Its ability to cater to both MM and MC cartridges, along with its meticulous attention to sound quality and build integrity, makes it a worthy investment for vinyl enthusiasts and audiophiles seeking to elevate their listening experience. Whether you're rediscovering old records or exploring new vinyl releases, the RQ-970BX promises to deliver an engaging and immersive sound that brings music to life.
Top Page Image Contents