24 en InstallationVideoJet X10 SN
4.4 | Power On/Power Off | |
| Power Supply | |
| The VideoJet X10 SN does not have a power switch. Power is supplied via a separate unit. | |
| Connect the VideoJet X10 SN to the power supply unit and plug this into the mains. The unit | |
| is now ready for use. The VideoJet X10 SN does not come supplied with a power supply unit. | |
|
| |
| CAUTION! | |
| Use only power supply units with UL approval and a power output according to LPS or | |
! | NEC Class 2. | |
Where necessary, use suitable equipment to ensure that the power supply is free from | ||
interference such as voltage surges, spikes or voltage drops. | ||
| Do not connect the VideoJet X10 SN to the power supply until all other connections have | |
| been made. | |
|
|
|
| 1. | Plug the terminal block with the PSU cable connected to it into the orange socket on the |
|
| VideoJet X10 SN. |
| 2. | Connect the power supply unit to the mains. The VideoJet X10 SN is ready for use as |
|
| soon as the Connect LED changes from a red light, indicating the |
|
| green light. |
| Provided the network connection has been correctly made, the yellow ETH LED also lights up. | |
| A flashing ETH LED signals that data packets are being transmitted via the network. | |
4.5 | Setup Using the Configuration Manager |
| The Configuration Manager program can be found on the product CD contained in the scope |
| of delivery. This program allows you to implement and set up new video servers in the |
| network quickly and conveniently. |
|
|
i | NOTICE! |
Using the Configuration Manager to set all parameters in the VideoJet X10 SN is an alternative | |
to configuration by means of a Web browser, as described in chapter 5 of this manual. | |
|
|
Installing the Program
1.Insert the CD into the computer's
2.If the CD does not start automatically, open the Configuration Manager directory using Windows Explorer and
3.Follow the
DOC V4.0 2009.06 | Installation and Operating Manual | Bosch Security Systems |
