VideoJet X10 SNSafety Information en 9
2 | Safety Information |
2.1 | Electric Shock Hazard |
| – Never attempt to connect the unit to any power network other than the type for which it |
| is intended. |
| – Use only power supply units with UL approval and a power output according to LPS or |
| NEC Class 2. |
| – Never open the housing. |
| – Never open the housing of the power supply unit. |
| – If a fault occurs, disconnect the power supply unit from the power supply and from all |
| other units. |
| – Install the power supply and the unit only in a dry, |
| – If safe operation of the unit cannot be ensured, remove it from service and secure it to |
| prevent unauthorized operation. In such cases, have the unit checked by Bosch Security |
| Systems. |
| Safe operation is no longer possible in the following cases: |
| – if there is visible damage to the unit or power cables, |
| – if the unit no longer operates correctly, |
| – if the unit has been exposed to rain or moisture, |
| – if foreign bodies have penetrated the unit, |
| – after long storage under adverse conditions, or |
| – after exposure to extreme stress in transit. |
2.2 | Installation and Operation |
| – The relevant electrical engineering regulations and guidelines must be complied with at |
| all times during installation. |
| – Relevant knowledge of network technology is required to install the unit. |
| – Before installing or operating the unit, make sure you have read and understood the |
| documentation for the other equipment connected to it, such as cameras. The |
| documentation contains important safety instructions and information about permitted |
| uses. |
| – Perform only the installation and operation steps described in this manual. Any other |
| actions may lead to personal injury, damage to property or damage to the equipment. |
2.3 | Maintenance and Repair |
| – Never open the housing of the VideoJet X10 SN. The unit does not contain any user- |
| serviceable parts. |
– Never open the housing of the power supply unit. The power supply unit does not contain any
– Ensure that all maintenance or repair work is carried out only by qualified personnel (electrical engineers or network technology specialists).
Bosch Security Systems | Installation and Operating Manual | DOC V4.0 2009.06 |