92 en Operation | VideoJet X10 SN |
|
|
View Control
Control options for peripherals (for example a pan/tilt head or dome camera) depend on the type of unit installed and on the configuration of the VideoJet X10 SN.
If a controllable unit is configured and connected to the VideoJet X10 SN, the controls for the peripheral are displayed next to the video image.
1.To control a peripheral, click the appropriate controls.
2.Move the mouse cursor over the video image. Additional options for controlling peripherals are displayed with the mouse cursor.
Digital I/O
The alarm icons Input 1 to Input 4 are for information purposes and indicate the status of an alarm input: When an alarm is triggered, the corresponding icon lights up blue. The unit's configuration determines whether the alarm is displayed, as well as additional details (see Section 5.15 Advanced Mode: LIVEPAGE Functions, page 42).
Triggering Relay
You can switch connected units using the relays in the VideoJet X10 SN (for example lights or door openers).
XTo activate this, click the icon for the corresponding relay next to the video image. The icon will be red when the relay is activated.
DOC V4.0 2009.06 | Installation and Operating Manual | Bosch Security Systems |
