Bosch Appliances X10 SN manual 4Installation, 1Preparations, 2Mounting

VideoJet X10 SN Installation en 19

4Installation

4.1Preparations

CAUTION!

The unit is intended for use indoors or in housings.

Select a suitable location for installation that guarantees to meet the environmental

!conditions. The ambient temperature must be between 0 and +50 °C (+32 and +122 °F). The relative humidity must not exceed 95%.

The VideoJet X10 SN generates heat during operation, so you should ensure that there is adequate ventilation and enough clearance between the unit and heat-sensitive objects or equipment.

Please ensure the following installation conditions:

–Do not install the unit close to heaters or other heat sources. Avoid locations exposed to direct sunlight.

–Allow sufficient space for running cables.

–Ensure that the unit has adequate ventilation.

–When making connections, use only the cables supplied or use appropriate cables immune to electromagnetic interference.

–Position and run all cables so that they are protected from damage, and provide adequate cable strain relief where needed.

–Avoid impacts, blows and severe vibrations that exceed the specification limits (see Section 9 Specifications, page 113), as these can irreparably damage the unit.

4.2Mounting

You can purchase a rack-mount kit from Bosch Security Systems, which is designed to accommodate three VideoJet X10 SN.

Bosch Security Systems Installation and Operating Manual DOC V4.0 2009.06