Bosch Appliances X10 SN manual System Log / Event Log, Audio Function

VideoJet X10 SN Operation en 93

System Log / Event Log

The System Log field contains information about the operating status of the VideoJet X10 SN and the connection. You can save these messages automatically in a file (see

Section 5.15 Advanced Mode: LIVEPAGE Functions, page 42).

Events such as the triggering or end of alarms are shown in the Event Log field. You can save these messages automatically in a file (see Section 5.15 Advanced Mode: LIVEPAGE Functions, page 42).

1.If you want to delete the entries, click the delete icon in the top right-hand corner of the relevant field.

2.If you want to view a detailed log, click the icon in the top right-hand corner of the relevant field. A new window will open.

Audio Function

Depending on the configuration, the VideoJet X10 SN can send and receive audio signals. All users who are connected by browsers receive the audio signals sent by the VideoJet X10 SN. Audio signals can only be sent to the VideoJet X10 SN by the user who connects to the unit first.

1.On the LIVEPAGE, click anywhere next to the video image to remove the focus from the ActiveX.

2.Hold down the F12 key to make a voice connection to the VideoJet X10 SN. The browser's status bar displays the message Send Audio ON.

3.Release the F12 key when you want to stop sending audio signals to the

VideoJet X10 SN. The status bar in Internet Explorer displays the message Send Audio OFF.

NOTICE!

i	When the connection maintaining voice contact with the VideoJet X10 SN is broken, the next
	user to make a connection to the VideoJet X10 SN can send audio data to the
	VideoJet X10 SN.

Bosch Security Systems Installation and Operating Manual DOC V4.0 2009.06