
18ENGLISH
Yellow Green
Yellow
Green
4Put the “INTENZA+ “water filter into the empty water tank. Press it until it cannot move further down.
5Fill the water tank with fresh water and reinsert it into the machine.
6Dispense the entire water tank by using the hot water function (see chapter “Hot water dispensing”).
7Fill the water tank again.
8Press the “” button and scroll the pages by pressing the “
” button until the following display is displayed.
9Press the “” button to select “ON” and press the “
” button to con- firm.
10To exit, press the “ ” button. The machine shows this display and is ready to brew.
In this way the machine has been programmed to inform the user of the need to replace the “INTENZA+” water filter.