Saeco Coffee Makers HD8761, HD8764 manual Instructions for the Power Supply Cord

Page 3

CAUTION

This appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service center. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the machine serviceable by the user. Repair should be done by authorized service personnel only.

1.Check voltage to be sure that the voltage indicated on the nameplate corresponds with your voltage.

2.Never use warm or hot water to fill the water tank. Use cold water only.

3.Keep your hands and the cord away from hot parts of the appliance during operation.

4.Never clean with scrubbing powders or harsh cleaners. Simply use a soft cloth dampened with water.

5.For optimal taste of your coffee, use purified or bottled water. Periodic descaling is still recommended every 2-3 months.

6.Do not use caramelized or flavored coffee beans.

INSTRUCTIONS FOR THE POWER

SUPPLY CORD

A. A short power-supply cord (or detachable power-supply cord) is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.

B.Longer detachable power-supply cords or extension cords are available and may used if care is exercised in their use.

C.If a long detachable power-supply cord or extension cord is used,

1.The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance

2.If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord, and

3.The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.

Image 3
Contents 02 EN Important Safeguards Instructions for the Power Supply Cord English English ContentsSafety instructions Do not touch hot surfaces. Use handles and knobs Always put the machine on a fl at and stable surface Compliance with standards Installation General description Machine installation Preparing for USEMachine packaging English Circuit priming Using the Machine for the First TimeAutomatic rinse/self- cleaning cycle Manual rinse cycle Red Green Measuring and programming water hardness = Soft water equals 1 or 2 on the tester strip INTENZA+ water filter installationEnglish Replacing the INTENZA+ water filter Adjustments Adjusting the ceramic coffee grinderSaeco Adapting System Adjusting the aroma coffee strength Adjusting the dispensing spout Adjusting the coffee lenght Espresso and Coffee Brewing Espresso and Coffee brewing using coffee beansEspresso and Coffee brewing using pre-ground coffee Steam Dispensing /CAPPUCCINO Brewing HOT Water Dispensing Daily cleaning of the machine Cleaning and MaintenanceDaily cleaning of the water tank Daily cleaning of the Classic Milk Frother Weekly cleaning of the machineWeekly cleaning of the Classic Milk Frother Weekly cleaning of the brew group Do not use detergent/soap to clean the brew group English Monthly lubrication of the brew group Monthly cleaning of the brew group with Coffee Oil Remover English Monthly cleaning of the coffee bean hopper Descaling process takes approx minutes DescalingEnglish English Green Yellow Ready Signals Green Colour Meaning of the Display SymbolsEnglish English Machine actions Causes Solutions TroubleshootingNing fo the brew group chapter Energy Saving Stand-byDisposal Service Technical SpecificationGuarantee and Service GuaranteeOrdering Maintenance Products Coffee Oil Remover CA6704 Maintenance Kit CA Page Page Page Rev.00 del